Mouse plate 
SIMUCUBE Front Mount
149 € (120.16 € tax 0 %)
- Compatibility:
- Simucube 2 Sport, Pro, Ultimate
- Simucube 1 and other ‘previous generation’ Direct Drive systems with MiGE motors 20/30 Nm
- 12 mm aluminium all plates
- Matte black
- Fits rigs with vertical profile (inner) distance 400-600 mm
- Horizontal slot holes: max. bolt distance 550 mm
- Adjustable tilt angle when side plates are used
- Usually mounted to the vertical profiles of an aluminum profile rig
- Multiple fixing points enable mounting to various types of (DIY) rigs
Available on backorder
Related Products
Basic frame 120
- Already have mounts/plates for pedals, wheel base and seat? Fix them to this frame and you are set.
- See also: our rig accessories
- Measurements (cm):
- Length 140 | Height 72 | Width 58
- Included in delivery:
- 20 x angle brackets with black covers
- 40 x T-nuts with M8 thread
- 40 x M8 bolts
- Black cover caps for profile ends
- Need extra parts? Ask us at info@simgrade.fi
Seat sliders Sparco HD
- Heavy Duty seat sliders from Sparco
- Sturdier construction vs. the standard sliders
- Mounting hole longitudinal distance 271 mm
- No FIA approval
SIMUCUBE 2 QR wheel side
- Already own or planning to buy an extra wheel for your Simucube 2 system? Attach this mechanism to your wheel and you are set.
- Wheel / rim compatibility:
- 6 x 70 mm pattern (by far the #1 standard)
- Also included 50.8 ➜ 70 mm pattern adapter
- Motor compatibility: Simucube 2 Sport, Pro and Ultimate
- Zero backlash = zero torque artifacts, crucial when no more than flawless force feedback feel is the target
- When locked in, equals a solid metal shaft. This is how it should be. And needs to be.
- Precision machined aluminium construction with black anodized surface finish
- 30 mm spacer (use when needed)
- Note: this product is included in Simucube 2 Direct Drive kits
SIMUCUBE Desk Mount
- Compatibility:
- Simucube 2 Sport, Pro, Ultimate
- Simucube 1 and other ‘previous generation’ Direct Drive motors with MiGE 20/30 Nm motors
- Adjustable tilt angle
- Can be mounted basically to any flat surface
- Mounting pattern: 210 mm x 40 mm (width / depth). Holes are for M8 bolts and min. M6 is recommended.
- Fits the -industry standard- 80/20 aluminum profile when spec 40×80 mm or above is used
- Material: 4 mm steel
- Matte black
- #technotactical
SIMUCUBE 2 Ultimate
32 Nm of torque and maxed-out torque response rate is at your disposal at anytime. Ultimate is based on Austrian made maximally dynamic industrial motor optimized for simulation. It’s equipped with a 24 bit resolution Hiperface angle sensor to be fully utilized by the most advanced signal processing unit seen in simulators.
Ultimate exclusively comes with advanced fine tunable signal processing to make the experience as personalized as humanly possible. This model was designed with “only the best is good enough” mindset.
Simucube Ultimate is a tribute to the Ultimate drivers.
Need a wheel too? Click HERE
– Scroll down for more feats and tech specs –
Rexing GT
- Full carbon fiber body: high strength, lightweight and superior finish
- 4.3″ LCD color display
- 15 x RPM LEDs (RGB)
- 3 + 3 LEDs at left and right side
- 13 x industrial grade push buttons with snap action
- Included: 2 x 12 pcs high-quality button labels
- 2 x easy-to-reach, thumb-operated rotary encoders
- 2 x rotary encoders on the front side
- 12-position switch (lower right corner)
- 2 x momentary toggle switches
- Magnetic paddle shifters
- Omron switches for ultimate reliability
- No metal-to-metal contact: reduced noise
- Original Alcantara® grips: superior quality and feel
- Weight: 1150 g | Diameter 320 mm | Grip thickest section 42 x 26 mm
Motion Systems QS-220-PL
Linear actuator technology by Motion Systems allows to develop highly realistic applications with detailed
motion textures, velocity, suspension interaction feedback, engine vibrations, tactile feedback, haptic
system and vehicle dynamics.
Innovative technology, modular and compact design, as well as the quiet operation makes the QS-220-PL as
a perfect motion base not only for professional application but also for home users in various types of
cockpits. Additional sets of QS-220-PL can be configured as a 4 and 6 actuated system to provide 3 / 4 / 6
DOF using dedicated cockpits from Qubic System product line.
By using dedicated software Qubic Manager the user can use several sets to create the most realistic
simulation that immediately responds to onscreen situations to deliver real life experience in gaming or VR
applications.
Scroll down to read more.
QS-MC6 below: 1 controller can manage max 6 actuators = 3 sets of QS-220-PL (sold in pairs)
Triple screen stand
- Sturdy, lean-free stand for a triple screen setup
- VESA 75/100 compatible
- Screen mounting plates are angle adjustable
- ‘Stepless’ fine tuning via M6 adjustment bolts ensures perfect aligning of the screens
- Height & width adjustable
- Vertical profiles
- Length: 120 cm | Inner distance max: 106 cm
- Bolts for screens included
- Optional: top screen mount (49 €)
Reviews
There are no reviews yet.