Seat side brackets Sabelt 
Be the first to review “SIMUCUBE Front Mount” Cancel reply
SIMUCUBE Front Mount
118.73€ (118.73€ tax 0%)
- Compatibility:
- Simucube 2 Sport, Pro, Ultimate
- Simucube 1 and other ‘previous generation’ Direct Drive systems with MiGE motors 20/30 Nm
- 12 mm aluminium all plates
- Matte black
- Fits rigs with vertical profile (inner) distance 400-600 mm
- Horizontal slot holes: max. bolt distance 550 mm
- Adjustable tilt angle when side plates are used
- Usually mounted to the vertical profiles of an aluminum profile rig
- Multiple fixing points enable mounting to various types of (DIY) rigs
Out of stock
Related Products
Wheel deck
- Powder coated, matte black aluminium 10 mm
- Width 500 mm | Depth 194 mm
- For details, see product pic
- Compatibility
- SimGrade mount for Simucube 1 & 2
- Fanatec
- DD1 and DD2, CSR / CSW / CSW Adapter / CSL
- Logitech G25 / G27 / G29
- Thrustmaster T300 / T500RS and similar
- Note: Fixing bolts vary per wheel base and are not included. If you need bolts, mention it in order comments and we’ll try to fulfill your request.
Rexing GT Wheel Timun v1.1
- Full carbon fiber body
- 4.3″ USBD480 LCD display compatible with popular sim racing software applications such as Simdash, Simhub and Z1
- 11 RGB LEDs, 6 additional marshal RGB LEDs: all configurable to telemetry data. Adjustable brightness (using a potentiometer on the wheel), and wide variety of colors to choose from
- 10 illuminated, dimmable push-buttons. Push buttons are high quality “Apem” brand with actuation force of 3.5 N and push travel of 1 mm
- 2 x Multi-switch which functions simultaneously as a rotary encoder, a digital joystick and a button
- 2 “Elma” brand thumb rotary encoders
- Original Alcantara® grips: superior quality and feel
- Weight: 1150 g | Diameter 320 mm | Grip thickest section 42 x 26 mm
READ MORE: SCROLL DOWN
Seat sliders Sparco
- High quality seat sliders from Sparco
- Longitudinal mounting hole distance 271 mm
- No FIA approval
- For lateral type mounting, side brackets are required
- If seat is bottom mount type (common in tubular frame seats and reclining seats), sliders can be fixed directly to the seat without side brackets
- Heavy duty version available here
Adjustable VESA plate
- Angle-adjustable mount for VESA 75 / VESA 100 compatible displays
- VESA 100 (100×100 mm pattern) is by far the most common type (also in 49″ Ultra / Super Ultra Wide displays)
- Can be mounted to practically any flat surface
- Usually mounted to aluminum profile (see pic)
- Angle can be adjusted without ‘steps’ as the adjusting is done with the M6 bolts
- This way the user can fine tune the angle / alignment exactly as wanted
- Included:
- M8 bolts – fixing the mount
- M6 bolts – angle adjustment
- M4 bolts – screen mounting (thread length: 10 mm)
- M4 spacers – screen mounting, used if necessary, depends on screen. Lengths: thread 8, body 10 mm
- Availability: 1 pc or 3 pcs
Select options This product has multiple variants. The options may be chosen on the product page
SIMUCUBE 2 Ultimate
32 Nm of torque and maxed-out torque response rate is at your disposal at anytime. Ultimate is based on Austrian made maximally dynamic industrial motor optimized for simulation. It’s equipped with a 24 bit resolution Hiperface angle sensor to be fully utilized by the most advanced signal processing unit seen in simulators.
Ultimate exclusively comes with advanced fine tunable signal processing to make the experience as personalized as humanly possible. This model was designed with “only the best is good enough” mindset.
SIMUCUBE Ultimate is a tribute to the Ultimate drivers. Scroll down for more feats and tech specs.
Need a wheel as well? Click here
Display Stand Triple HD Black
- Sturdy, lean-free stand for a triple screen setup
- VESA 75/100 compatible
- Screen mounting plates are angle adjustable
- ‘Stepless’ fine tuning via M6 adjustment bolts ensures perfect aligning of the screens
- Height & width adjustable
- Vertical profiles
- Length: 112 cm | Inner distance max: 104 cm
- Bolts for screens included
Sale!
Original price was: 35.86€.23.11€Current price is: 23.11€. (23.11€ tax 0%)
Display Mount VESA 75-100
- Angle & distance adjustable display mount
- Compatible with the most common standards: VESA 75 / VESA 100
- Inner distance of the side plates: 120 mm
- Fits, for example: 40×120 mm aluminum profile (see pics)
- Steel with 5 mm thickness: extremely sturdy
- Matte black
- Mounting holes on the sides: for M8 bolts
- Mounting holes on the front: for M4 bolts (standard)
- Included: 4 pcs M4x10 bolts & 4 pcs M4 male-female standoffs
Direct Drive Mount
- Compatibility:
- SIMUCUBE 2 Sport, Pro, Ultimate
- SIMUCUBE 1 and other ‘previous generation’ Direct Drive motors with MiGE 130ST 20/30 Nm motors, for example VRS Direct Force Pro
- Adjustable tilt angle
- Can be mounted basically to any flat surface
- Mounting pattern: 210 mm x 40 mm (width / depth). Holes are for M8 bolts and min. M6 is recommended.
- Fits the industry standard 80/20 aluminum profile when spec 40×80 mm or above is used
- Material: 4 mm steel
- Matte black
- #technotactical
Reviews
There are no reviews yet.