Heel Support / Stopper 
Be the first to review “Display Stand HD” Cancel reply
Display Stand HD
206.37€ – 238.25€
- Heavy duty stand for displays up to 65″
- VESA 100 and VESA 75 compatible
- Available in two colors / finishes:
- Black anodized
- Natural anodized (light grey)
- Bolt-through-profile fixing method used in the vertical profiles
- As the stand is not fixed to the rig
- Distance from user is easily adjustable
- Vibration from a powerful wheel base like direct drive can’t reach the display (which might harm the display over time)
- If needed, TV and other brackets are usually easy to mount to the aluminum slot profile (note: accessories like bolts etc. not included, varies between display manufacturers)
- Measurements
- Floor profiles: 700 mm
- Vertical profiles: 1100 mm
- Inner width: 700 mm
Related Products
Display Stand Silver Triple HD
- Sturdy, lean-free stand for a triple screen setup
- VESA 75/100 compatible
- Screen mounting plates are angle adjustable
- ‘Stepless’ fine tuning via M6 adjustment bolts ensures perfect aligning of the screens
- Height & width adjustable
- Vertical profiles
- Length: 112 cm | Inner distance max: 104 cm
- Bolts for screens included
- Optional: top screen mount
Select options This product has multiple variants. The options may be chosen on the product page
Adjustable VESA plate
- Angle-adjustable mount for VESA 75 / VESA 100 compatible displays
- VESA 100 (100×100 mm pattern) is by far the most common type (also in 49″ Ultra / Super Ultra Wide displays)
- Can be mounted to practically any flat surface
- Usually mounted to aluminum profile (see pic)
- Angle can be adjusted without ‘steps’ as the adjusting is done with the M6 bolts
- This way the user can fine tune the angle / alignment exactly as wanted
- Included:
- M8 bolts – fixing the mount
- M6 bolts – angle adjustment
- M4 bolts – screen mounting (thread length: 10 mm)
- M4 spacers – screen mounting, used if necessary, depends on screen. Lengths: thread 8, body 10 mm
- Availability: 1 pc or 3 pcs
Select options This product has multiple variants. The options may be chosen on the product page
SALE !
Original price was: 35.86€.23.11€Current price is: 23.11€. (23.11€ tax 0 %)
Display Mount VESA 75-100
- Angle & distance adjustable display mount
- Compatible with the most common standards: VESA 75 / VESA 100
- Inner distance of the side plates: 120 mm
- Fits, for example: 40×120 mm aluminum profile (see pics)
- Steel with 5 mm thickness: extremely sturdy
- Matte black
- Mounting holes on the sides: for M8 bolts
- Mounting holes on the front: for M4 bolts (standard)
- Included: 4 pcs M4x10 bolts & 4 pcs M4 male-female standoffs
Seat sliders Sparco HD
- Heavy Duty seat sliders from Sparco
- Sturdier construction vs. the standard sliders
- Mounting hole longitudinal distance 271 mm
- No FIA approval
Heel support & stopper “per foot”
- Universal heel support / stopper
- Slot holes: distance adjustable
- Aluminum, matte black
- Can be mounted to practically any flat surface
- Countersunk slot holes for distance adjustment
- With individual plates per pedal, user preference can be matched 100 %
- 4 x bolts & T-nuts included per plate
- 1 / 2 / 3 pcs available
- Overall length: 118 mm | Width: 100 mm
Select options This product has multiple variants. The options may be chosen on the product page
Seat side brackets Sabelt
- Sturdy side brackets from Sabelt
- To be used with seats that have lateral fixing
- Steel with 3 mm thickness
- Surface finish: black paint
- Mounting holes for M8 bolts
Display Stand Light
- Light but sturdy aluminum stand for displays up to 49″
- VESA 100 and VESA 75 compatible
- Available in two colors / finishes:
- Black anodized
- Natural anodized (light grey)
- As the stand is not fixed to the rig
- Distance from user is easily adjustable
- Vibration from a powerful wheel base like direct drive can’t reach the display (which might harm the display over time)
- If needed, TV and other brackets are usually easy to mount to the slot profile (note: accessories like bolts etc. not included, varies between display manufacturers)
- Measurements:
- Floor profiles: 700 mm
- Vertical profiles: 1100 mm
- Inner width 700 mm
Select options This product has multiple variants. The options may be chosen on the product page
T-nut for aluminum profile M6/M8
- Fits the ‘sim racing standard’ aluminum profile (see images)
- Typical profile sizes: 40×40, 40×80, 40×120, 40×160
- Self-aligns in the profile slot with spring loaded stainless steel ball
- The ball prevents unwanted movement in the slot
- Body material zinc plated steel
- Thread sizes M6 & M8 (in main image)
- Quantities available: 10 / 25 / 50 / 100 / 200
Select options This product has multiple variants. The options may be chosen on the product page
EN 
FI
Reviews
There are no reviews yet.