Seat side brackets

For fixing a seat to seat sliders or directly to rig
Easy to assemble and fits almost any seat
Steel, 4 mm
Powder coated black finish
M8 bolts fit all holes
Brackets for increased seat angle adjustment
- Not obligatory to use but nifty when, for instance, formula style ergonomics is desired
- Bigger angle is usually better for your back
Dimensions
- Height: 140 mm | Width: 79 mm
- See also: product pic with dimensions

Can be mounted to alum. rig or almost any other material with the included angle bracket (see pics)
Width 250 mm, depth 200 mm
Steel with 3 mm thickness
Surface: black powder coating
3 x countersunk holes for M6 bolts (included)
Included in delivery:
- M6 T-nuts for alum. profile
- 40 x 40 alum. profile, L=440 mm
- Angle bracket and bracket cover for fixing the profile to a rig
- 2 x M8 t-nut
- 2 x M8 bolt

Adjustable motor mount, compatible with:
- Simucube 2 Sport, Pro and Ultimate
- Simucube 1 with MiGE motors (20 and 30 Nm models)
Fits natively all Simucube 2 models as the mount has two sets of bolt patterns (Ultimate has smaller pattern vs. Sport & Pro)
Height and angle adjustable
Fits directly to an aluminium profile with a minimum of 40×80 spec
Measurements: see picture
All holes and slot holes for M8 bolts
Material: 3 mm steel
Surface: powder coated matte black
M8 bolts, nylock nuts and washers for fixing the ‘paws’ (part #2, see pic) to the mount are included
Note: regarding the upright direction (lowest) fixing bolts: depending on the rig / frame that the motor is installed, required bolt lengths vary. You can request bolts to be included in the delivery (mention it in order comments). We can’t guarantee the extra bolts and nuts delivery but we’ll do our best to fulfill the request.

The same wheel deck as used in RiGiDity
Powder coated matte black aluminium
Width 500 mm | Depth 194 mm | Thickness 10 mm
- For details, see product pic
Compatibility
- SimGrade mount for Simucube 1 & 2
- Fanatec
  - DD1 and DD2 motors
  - Porsche wheel
  - CSR / CSW / CSW Adapter / CSL
- Logitech G25 / G27 / G29
Thrustmaster T300 / T500RS
Note: Fixing bolts vary per wheel base and are not included. If you need bolts, mention it in order comments and we’ll try to fulfill your request.

119 €

With QRT technology: unbeatable strength to weight ratio
Removable / movable pads with Velcro (see pics)
- Widely adjustable for better ergonomics
- Pads can also be washed
New stitching
Mounting: lateral fastening with 290 mm spacing
Weight: Shell 5.4 kg | Total 6.5 kg
Design and quality by Sparco

359 €

379 €

Already have mounts/plates for pedals, wheel base and seat? Fix them to this frame and you are set.
See also: our rig accessories
Measurements (cm):
- Length 140 | Height 72 | Width 58
Included in delivery:
- 20 x angle brackets with black covers
- 40 x T-nuts with M8 thread
- 40 x M8 bolts
- Black cover caps for profile ends
Need extra parts? Ask us at info@simgrade.fi

319 €

Compatible with most wheel bases and pedals
- See also: our rig accessories
Highly modular: use the best suited config for your use
Upright 40 x 120 profiles are fixed to ‘floor’ profiles with M8 bolts, which yields several benefits:
- Easy to assemble
- Easy to make adjustments
- No gaps: no squeaking when driving
Included in delivery:
- 30 x angle brackets with black covers
- 60 x T-nuts with M8 thread
- 60 x M8 bolts
- Black cover caps for profile ends
Measurements (cm):
- Length 140 | Height 72 | Width 58
Need extra parts or modification? Ask us at info@simgrade.fi

499 €