Heel Support / Stopper
31.08€ (31.08€ tax 0 %)
- Great for VX-PRO and Thera pedals, can be used with basically any pedals
- Fixing bolts M5 & t-nuts M5 included for mounting to aluminum profile (or just a plain plate)
- Can be mounted on any flat surface
- Black powder coating surface finish
- Width 386 mm
In stock
Related Products
Heusinkveld Sprint base plate
- Solid platform to mount Sprint pedals on your rig
- Mounting points are slots allowing lateral adjustment per individual pedal: 29 mm for brake, 24 mm for throttle & clutch
- Height adjustable heel plate, options: 0/20/40 mm
- Mounting hardware is supplied to mount the pedals to the base plate, as well as hardware to mount the base plate to a 6 mm thick underlying plate
- Powder coated anthacite grey & bead blasted semi-gloss surface finish
Thera Clutch
- Billet aluminum, black anodized finish
- Stainless steel ball bearings in all major pivot points
- Ultra smooth operation ensured by using ball bearings
- Zero lateral play
- No lubrication required
- Silent operation by design
- No metal-to-metal contact on end stoppers
- Mounting: 4 x M6 bolts, mounting pattern (click to open) 80 x 24 mm
- 5 year warranty
- Designed, manufactured and assembled in Finland 🇫🇮
SIMUCUBE Front Mount
- Compatibility:
- Simucube 2 Sport, Pro, Ultimate
- Simucube 1 and other ‘previous generation’ Direct Drive systems with MiGE motors 20/30 Nm
- 12 mm aluminium all plates
- Matte black
- Fits rigs with vertical profile (inner) distance 400-600 mm
- Horizontal slot holes: max. bolt distance 550 mm
- Adjustable tilt angle when side plates are used
- Usually mounted to the vertical profiles of an aluminum profile rig
- Multiple fixing points enable mounting to various types of (DIY) rigs
Heusinkveld Sprint
- Strong, compact and widely adjustable design
- Precision laser cut steel, with grey anthracite RAL7016 and bead blasted semi-gloss surface finish
- Maximum actual brake pedal load 65 kg
- Brake feel easily adjustable with 6 different rubber stack heights and a spring for simulating free play before brake pads start to bite
- Load cells don’t wear out, are very accurate and insensitive to dust and dirt, features which make LCs the #1 solution for signal measuring in sim pedals
- SmartControl software allows easy configuration of dead zones, brake force and non-linear pedal output curves
- Base plate for Sprint pedals: here
Select options This product has multiple variants. The options may be chosen on the product page
Adjustable VESA plate
- Angle-adjustable mount for VESA 75 / VESA 100 compatible displays
- VESA 100 (100×100 mm pattern) is by far the most common type (also in 49″ Ultra / Super Ultra Wide displays)
- Can be mounted to practically any flat surface
- Usually mounted to aluminum profile (see pic)
- Angle can be adjusted without ‘steps’ as the adjusting is done with the M6 bolts
- This way the user can fine tune the angle / alignment exactly as wanted
- Included:
- M8 bolts – fixing the mount
- M6 bolts – angle adjustment
- M4 bolts – screen mounting (thread length: 10 mm)
- M4 spacers – screen mounting, used if necessary, depends on screen. Lengths: thread 8, body 10 mm
- Availability: 1 pc or 3 pcs
Select options This product has multiple variants. The options may be chosen on the product page
SALE !
Original price was: 35.86€.23.11€Current price is: 23.11€. (23.11€ tax 0 %)
Display Mount VESA 75-100
- Angle & distance adjustable display mount
- Compatible with the most common standards: VESA 75 / VESA 100
- Inner distance of the side plates: 120 mm
- Fits, for example: 40×120 mm aluminum profile (see pics)
- Steel with 5 mm thickness: extremely sturdy
- Matte black
- Mounting holes on the sides: for M8 bolts
- Mounting holes on the front: for M4 bolts (standard)
- Included: 4 pcs M4x10 bolts & 4 pcs M4 male-female standoffs
VX-PRO Brake Kit V1
- Alternative brake kit for VX-PRO pedals
- Two softer springs (vs. default yellow)
- Red: medium
- Blue: soft
- New side plates
- Available load bearing positions (four) differ from the stock plates, see last product image
- Red line depicts the stock side plate, black line the Brake Kit V1 version. This design allows extra brake configurations to find & match driver preference perfectly.
- Top position is higher than in the stock plates, creating a ‘maxxed-out’ stiffness configuration (with the yellow spring)
- Available load bearing positions (four) differ from the stock plates, see last product image
- The springs included can be used with the stock side plates, and the new side plates with the yellow (default) spring
Thera 2-pedal set
NEW 02/2023: Thera compatible with consoles via Drive Hub!
Extra info for PS5: here
Billet aluminum structure. Black anodized finish. Ultra smooth, silent operation. Rigidity: like no other. Super fast & easy adjustments. Zero lateral play. Linear-force operated, high accuracy clutch – the first on the market.
Inspired by these features? If yes, SIMGRADE° Thera pedals are the #1 choice for your sim racing setup.
DAN SUZUKI’S Review
Looking for a 3-pedal set? Click here
Mounting plates and other accessories here
Manual & calibration software here
More pictures here
FULL SPECS: SCROLL DOWN
EN 
FI
Janne (verified owner) –
sturdy plate, although in pictures it shows 4 screw holes, there were only two, those 2 are sufficient for mounting.