VX-PRO Brake Kit V1 
Be the first to review “Display Mount VESA 75-100” Cancel reply
Sale!
Display Mount VESA 75-100
23.11€ (23.11€ tax 0%)
- Angle & distance adjustable display mount
- Compatible with the most common standards: VESA 75 / VESA 100
- Inner distance of the side plates: 120 mm
- Fits, for example: 40×120 mm aluminum profile (see pics)
- Steel with 5 mm thickness: extremely sturdy
- Matte black
- Mounting holes on the sides: for M8 bolts
- Mounting holes on the front: for M4 bolts (standard)
- Included: 4 pcs M4x10 bolts & 4 pcs M4 male-female standoffs
Out of stock
Related Products
Tilting heel support for VX-PRO pedals
Supports driver’s heel through the whole pedal travel range, eliminating need for repositioning your foot during racing.
In addition, sole of the foot sliding along pedal face is effectively in the history.
Briefly put, this brilliant kit brings comfort and input accuracy to a whole new level!
Compatible with VX-PRO throttle & brake. Price is per one pedal.
Side support for VX-PRO pedals
Prevents foot from sliding sideways, resulting in decreased fatigue and increased comfort.
Driving becomes more relaxed, which in turn boosts consistency and performance, particularly when driving long stints.
Material: 2mm stainless steel. Compatible with all VX-PRO pedals, price is per one pedal.
T-nut for aluminum profile M6/M8
- Fits the ‘sim racing standard’ aluminum profile (see images)
- Typical profile sizes: 40×40, 40×80, 40×120, 40×160
- Self-aligns in the profile slot with spring loaded stainless steel ball
- The ball prevents unwanted movement in the slot
- Body material zinc plated steel
- Thread sizes M6 & M8 (in main image)
- Quantities available: 10 / 25 / 50 / 100 / 200
Select options This product has multiple variants. The options may be chosen on the product page
VX-PRO Brake Kit V1
- Optional brake kit for VX-PRO pedals
- Provides extra adjustment range
- Two softer springs (compared to default yellow)
- Red: medium
- Blue: soft
- New side plates
- Available load bearing positions (four) differ from the stock plates, see last product image
- Red line depicts the stock side plate, black line the Brake Kit V1 version. This design allows extra brake configurations to find & match driver preference perfectly.
- Top position is higher than in the stock plates, creating a ‘maxxed-out’ stiffness configuration (with the yellow spring)
- Available load bearing positions (four) differ from the stock plates, see last product image
- The springs included can be used with stock side plates and the kit side plates with yellow default spring
Pivot Plate
- Pivot plate for fixing two aluminum profiles together
- Usually to mount a side monitor in a triple screen setup
- 40 degree scale for adjusting the pivot (+/- 20 degrees)
- Can be used in other than alu-profile rigs as well, if the construction is suitable
- Mounting holes are for M8 bolts
- Material: 5 mm aluminum, matte black
- Sold in kits of two and four
- Optional: M8 bolts, washers and T-nuts
- 8 pcs each if 2 plates selected
- 16 pcs each if 4 plates selected
Select options This product has multiple variants. The options may be chosen on the product page
SIMUCUBE 2 Sport
Sport comes with 17 Nm of direct drive torque and SIMUCUBE 2 benefits. This wheel base is a match for Sim Racing enthusiasts.
SC2 Sport delivers serious amount of juice to bring up adrenaline filled sweat to the skins of drivers. Sport has comparable responsiveness and signal processing of the top-end models of world famous SIMUCUBE 1
Sport will be your key to the club of sim racing champions. Scroll down for more feats and tech specs.
Need a wheel too? Click here
Quick Release for wheel sold separately. Link to product site.
Adjustable VESA plate
- Angle-adjustable mount for VESA 75 / VESA 100 compatible displays
- VESA 100 (100×100 mm pattern) is by far the most common type (also in 49″ Ultra / Super Ultra Wide displays)
- Can be mounted to practically any flat surface
- Usually mounted to aluminum profile (see pic)
- Angle can be adjusted without ‘steps’ as the adjusting is done with the M6 bolts
- This way the user can fine tune the angle / alignment exactly as wanted
- Included:
- M8 bolts – fixing the mount
- M6 bolts – angle adjustment
- M4 bolts – screen mounting (thread length: 10 mm)
- M4 spacers – screen mounting, used if necessary, depends on screen. Lengths: thread 8, body 10 mm
- Availability: 1 pc or 3 pcs
Select options This product has multiple variants. The options may be chosen on the product page
Wheel deck
- Powder coated, matte black aluminium 10 mm
- Width 500 mm | Depth 194 mm
- For details, see product pic
- Compatibility
- SimGrade mount for Simucube 1 & 2
- Fanatec
- DD1 and DD2, CSR / CSW / CSW Adapter / CSL
- Logitech G25 / G27 / G29
- Thrustmaster T300 / T500RS and similar
- Note: Fixing bolts vary per wheel base and are not included. If you need bolts, mention it in order comments and we’ll try to fulfill your request.
Reviews
There are no reviews yet.