Be the first to review “SIMUCUBE Front Mount” Cancel reply
- You cannot add "SIMUCUBE 2 Ultimate" to the cart because the product is out of stock.
SIMUCUBE Front Mount
118.73€ (118.73€ tax 0%)
- Compatibility:
- Simucube 2 Sport, Pro, Ultimate
- Simucube 1 and other ‘previous generation’ Direct Drive systems with MiGE motors 20/30 Nm
- 12 mm aluminium all plates
- Matte black
- Fits rigs with vertical profile (inner) distance 400-600 mm
- Horizontal slot holes: max. bolt distance 550 mm
- Adjustable tilt angle when side plates are used
- Usually mounted to the vertical profiles of an aluminum profile rig
- Multiple fixing points enable mounting to various types of (DIY) rigs
Out of stock
SKU: SGR-FM Categories: Direct Drive, Direct Drive Accessories, Rig Accessories, Rigs, Simucube 2 Pro, Simucube 2 Sport, Simucube 2 Ultimate
Related Products

Direct Drive Mount
- Compatibility:
- SIMUCUBE 2 Sport, Pro, Ultimate
- SIMUCUBE 1 and other ‘previous generation’ Direct Drive motors with MiGE 130ST 20/30 Nm motors, for example VRS Direct Force Pro
- Adjustable tilt angle
- Can be mounted basically to any flat surface
- Mounting pattern: 210 mm x 40 mm (width / depth). Holes are for M8 bolts and min. M6 is recommended.
- Fits the industry standard 80/20 aluminum profile when spec 40×80 mm or above is used
- Material: 4 mm steel
- Matte black
- #technotactical

Display Stand Triple HD Black
- Sturdy, lean-free stand for a triple screen setup
- VESA 75/100 compatible
- Screen mounting plates are angle adjustable
- ‘Stepless’ fine tuning via M6 adjustment bolts ensures perfect aligning of the screens
- Height & width adjustable
- Vertical profiles
- Length: 112 cm | Inner distance max: 104 cm
- Bolts for screens included

SIMUCUBE 2 Ultimate
32 Nm of torque and maxed-out torque response rate is at your disposal at anytime. Ultimate is based on Austrian made maximally dynamic industrial motor optimized for simulation. It’s equipped with a 24 bit resolution Hiperface angle sensor to be fully utilized by the most advanced signal processing unit seen in simulators.
Ultimate exclusively comes with advanced fine tunable signal processing to make the experience as personalized as humanly possible. This model was designed with “only the best is good enough” mindset.
SIMUCUBE Ultimate is a tribute to the Ultimate drivers. Scroll down for more feats and tech specs.
Need a wheel as well? Click here

SIMGRADE° FX-80 Black
- Compact rig with black anodized finish
- Rigid and sturdy construction: can be used with Direct Drive wheel bases
- Natively compatible with Fanatec DD1, DD2 and CSL wheel bases
- When this: Direct Drive mount is fixed to the platform, rig is compatible with:
- Simucube 2 Sport, Pro & Ultimate
- VRS Direct Force Pro
- Simucube 1 and other previous generation Direct Drive wheel bases with MiGE motor 20/30 Nm
- Direct “bolt through profile” mounting method ⇒ no angle brackets needed
- Result: extra rigidity, easy to assemble and adjust, no squeaking noise when driving
- Wheel base mounting platform can be tilted up / down to get a perfect wheel angle
- Pedal deck can be easily moved back and forth
- Basically any pedals can be mounted
- Hand brake / shifter / mouse tray profile available as an option
- Pedals in pics: SIMGRADE° Thera
- Heel plate in pics: SIMGRADE° Thera heel plate
Select options This product has multiple variants. The options may be chosen on the product page

SIMUCUBE 2 Sport
Sport comes with 17 Nm of direct drive torque and SIMUCUBE 2 benefits. This wheel base is a match for Sim Racing enthusiasts.
SC2 Sport delivers serious amount of juice to bring up adrenaline filled sweat to the skins of drivers. Sport has comparable responsiveness and signal processing of the top-end models of world famous SIMUCUBE 1
Sport will be your key to the club of sim racing champions. Scroll down for more feats and tech specs.
Need a wheel too? Click here
Quick Release for wheel sold separately. Link to product site.

Steering Wheel Spacer 50mm
- Black anodized aluminium
- Length: 50 mm
- Standard 6 x 70 mm bolt pattern (for M5 bolts)
- Available in three lengths: 50/75/100 mm
- Use as an extension to bring steering wheel closer to the driver

Mouse plate
- Can be mounted to alum. rig or almost any other material with the included angle bracket (see pics)
- Width 290 mm, depth 210 mm
- Steel with 3 mm thickness
- Surface: black powder coating
- 3 x countersunk holes for M6 bolts (included)
- Included in delivery:
- M6 T-nuts for alum. profile
- 40 x 40 alum. profile, L=440 mm
- Angle bracket and bracket cover for fixing the profile to a rig
- 2 x M8 t-nut
- 2 x M8 bolt

Seat side brackets Sabelt
- Sturdy side brackets from Sabelt
- To be used with seats that have lateral fixing
- Steel with 3 mm thickness
- Surface finish: black paint
- Mounting holes for M8 bolts
Reviews
There are no reviews yet.