Be the first to review “Mouse plate” Cancel reply
Mouse plate
23.11€ (23.11€ tax 0%)
- Can be mounted to alum. rig or almost any other material with the included angle bracket (see pics)
- Width 290 mm, depth 210 mm
- Steel with 3 mm thickness
- Surface: black powder coating
- 3 x countersunk holes for M6 bolts (included)
- Included in delivery:
- M6 T-nuts for alum. profile
- 40 x 40 alum. profile, L=440 mm
- Angle bracket and bracket cover for fixing the profile to a rig
- 2 x M8 t-nut
- 2 x M8 bolt
Out of stock
Related Products
Display Stand Light
- Light but sturdy aluminum stand for displays up to 49″
- VESA 100 and VESA 75 compatible
- Available in two colors / finishes:
- Black anodized
- Natural anodized (light grey)
- As the stand is not fixed to the rig
- Distance from user is easily adjustable
- Vibration from a powerful wheel base like direct drive can’t reach the display (which might harm the display over time)
- If needed, TV and other brackets are usually easy to mount to the slot profile (note: accessories like bolts etc. not included, varies between display manufacturers)
- Measurements:
- Floor profiles: 700 mm
- Vertical profiles: 1100 mm
- Inner width 700 mm
Select options This product has multiple variants. The options may be chosen on the product page
Trak Racer TR160 MK4
The TR160, the King of the Rigs, has been designed with experience gained since Trak Racer started in 2008. The base structure is 160 × 40mm high-end aluminium T-Slot extruded profile, anodized in black.
Your choice of wheel mount will be supported by 160 × 40mm high-end aluminium T-Slot extruded profile wheel uprights, also anodized in black and supported with Trak Racer-Signature Corner Brackets – mounted to the side for additional support.
Wheel bases, pedals and other compatibility ⇒ scroll down.
Need a display stand as well? Click here
Select options This product has multiple variants. The options may be chosen on the product page
Adjustable VESA plate
- Angle-adjustable mount for VESA 75 / VESA 100 compatible displays
- VESA 100 (100×100 mm pattern) is by far the most common type (also in 49″ Ultra / Super Ultra Wide displays)
- Can be mounted to practically any flat surface
- Usually mounted to aluminum profile (see pic)
- Angle can be adjusted without ‘steps’ as the adjusting is done with the M6 bolts
- This way the user can fine tune the angle / alignment exactly as wanted
- Included:
- M8 bolts – fixing the mount
- M6 bolts – angle adjustment
- M4 bolts – screen mounting (thread length: 10 mm)
- M4 spacers – screen mounting, used if necessary, depends on screen. Lengths: thread 8, body 10 mm
- Availability: 1 pc or 3 pcs
Select options This product has multiple variants. The options may be chosen on the product page
Pivot Plate
- Pivot plate for fixing two aluminum profiles together
- Usually to mount a side monitor in a triple screen setup
- 40 degree scale for adjusting the pivot (+/- 20 degrees)
- Can be used in other than alu-profile rigs as well, if the construction is suitable
- Mounting holes are for M8 bolts
- Material: 5 mm aluminum, matte black
- Sold in kits of two and four
- Optional: M8 bolts, washers and T-nuts
- 8 pcs each if 2 plates selected
- 16 pcs each if 4 plates selected
Select options This product has multiple variants. The options may be chosen on the product page
Direct Drive Mount
- Compatibility:
- SIMUCUBE 2 Sport, Pro, Ultimate
- SIMUCUBE 1 and other ‘previous generation’ Direct Drive motors with MiGE 130ST 20/30 Nm motors, for example VRS Direct Force Pro
- Adjustable tilt angle
- Can be mounted basically to any flat surface
- Mounting pattern: 210 mm x 40 mm (width / depth). Holes are for M8 bolts and min. M6 is recommended.
- Fits the industry standard 80/20 aluminum profile when spec 40×80 mm or above is used
- Material: 4 mm steel
- Matte black
- #technotactical
SIMGRADE° FX-80 Black
- Compact rig with black anodized finish
- Rigid and sturdy construction: can be used with Direct Drive wheel bases
- Natively compatible with Fanatec DD1, DD2 and CSL wheel bases
- When this: Direct Drive mount is fixed to the platform, rig is compatible with:
- Simucube 2 Sport, Pro & Ultimate
- VRS Direct Force Pro
- Simucube 1 and other previous generation Direct Drive wheel bases with MiGE motor 20/30 Nm
- Direct “bolt through profile” mounting method ⇒ no angle brackets needed
- Result: extra rigidity, easy to assemble and adjust, no squeaking noise when driving
- Wheel base mounting platform can be tilted up / down to get a perfect wheel angle
- Pedal deck can be easily moved back and forth
- Basically any pedals can be mounted
- Hand brake / shifter / mouse tray profile available as an option
- Pedals in pics: SIMGRADE° Thera
- Heel plate in pics: SIMGRADE° Thera heel plate
Select options This product has multiple variants. The options may be chosen on the product page
Seat side brackets Sabelt
- Sturdy side brackets from Sabelt
- To be used with seats that have lateral fixing
- Steel with 3 mm thickness
- Surface finish: black paint
- Mounting holes for M8 bolts
Wheel deck
- Powder coated, matte black aluminium 10 mm
- Width 500 mm | Depth 194 mm
- For details, see product pic
- Compatibility
- SimGrade mount for Simucube 1 & 2
- Fanatec
- DD1 and DD2, CSR / CSW / CSW Adapter / CSL
- Logitech G25 / G27 / G29
- Thrustmaster T300 / T500RS and similar
- Note: Fixing bolts vary per wheel base and are not included. If you need bolts, mention it in order comments and we’ll try to fulfill your request.
Reviews
There are no reviews yet.