Q1R wheel side 70 mm 
Be the first to review “SIMUCUBE Front Mount” Cancel reply
SIMUCUBE Front Mount
118.73€ (118.73€ tax 0%)
- Compatibility:
- Simucube 2 Sport, Pro, Ultimate
- Simucube 1 and other ‘previous generation’ Direct Drive systems with MiGE motors 20/30 Nm
- 12 mm aluminium all plates
- Matte black
- Fits rigs with vertical profile (inner) distance 400-600 mm
- Horizontal slot holes: max. bolt distance 550 mm
- Adjustable tilt angle when side plates are used
- Usually mounted to the vertical profiles of an aluminum profile rig
- Multiple fixing points enable mounting to various types of (DIY) rigs
Out of stock
Related Products
Trak Racer TR120 MK4
The TR120 has been designed with experience gained since Trak Racer started in 2008. The base structure is 120 × 40mm high-end aluminium T-Slot extruded profile, anodized in black.
Your choice of wheel mount will be supported by 120 × 40mm high-end aluminium T-Slot extruded profile wheel uprights, also anodized in black and supported with Trak Racer-Signature Corner Brackets – mounted to the side for additional support.
Wheel base, pedals and shifter compatibilities ⇒ scroll down.
Need a display stand as well? Click here
Select options This product has multiple variants. The options may be chosen on the product page
Seat sliders Sparco
- High quality seat sliders from Sparco
- Longitudinal mounting hole distance 271 mm
- No FIA approval
- For lateral type mounting, side brackets are required
- If seat is bottom mount type (common in tubular frame seats and reclining seats), sliders can be fixed directly to the seat without side brackets
- Heavy duty version available here
Seat side brackets Sabelt
- Sturdy side brackets from Sabelt
- To be used with seats that have lateral fixing
- Steel with 3 mm thickness
- Surface finish: black paint
- Mounting holes for M8 bolts
Adjustable VESA plate
- Angle-adjustable mount for VESA 75 / VESA 100 compatible displays
- VESA 100 (100×100 mm pattern) is by far the most common type (also in 49″ Ultra / Super Ultra Wide displays)
- Can be mounted to practically any flat surface
- Usually mounted to aluminum profile (see pic)
- Angle can be adjusted without ‘steps’ as the adjusting is done with the M6 bolts
- This way the user can fine tune the angle / alignment exactly as wanted
- Included:
- M8 bolts – fixing the mount
- M6 bolts – angle adjustment
- M4 bolts – screen mounting (thread length: 10 mm)
- M4 spacers – screen mounting, used if necessary, depends on screen. Lengths: thread 8, body 10 mm
- Availability: 1 pc or 3 pcs
Select options This product has multiple variants. The options may be chosen on the product page
SIMUCUBE 2 Prem. Torque Off
- For SIMUCUBE 2 Sport and Pro (supplied as a standard with Ultimate)
- Optional upgrade = not required with Sport & Pro but in case you wanna go premium
- Blue led for power status
- Switch for powering the wheelbase ON / OFF
- CNC machined aluminium construction
- Black anodized surface finish
- Cable included
- Supplied as standard in Simucube 2 Ultimate
Direct Drive Mount
- Compatibility:
- SIMUCUBE 2 Sport, Pro, Ultimate
- SIMUCUBE 1 and other ‘previous generation’ Direct Drive motors with MiGE 130ST 20/30 Nm motors, for example VRS Direct Force Pro
- Adjustable tilt angle
- Can be mounted basically to any flat surface
- Mounting pattern: 210 mm x 40 mm (width / depth). Holes are for M8 bolts and min. M6 is recommended.
- Fits the industry standard 80/20 aluminum profile when spec 40×80 mm or above is used
- Material: 4 mm steel
- Matte black
- #technotactical
SIMUCUBE 2 Ultimate
32 Nm of torque and maxed-out torque response rate is at your disposal at anytime. Ultimate is based on Austrian made maximally dynamic industrial motor optimized for simulation. It’s equipped with a 24 bit resolution Hiperface angle sensor to be fully utilized by the most advanced signal processing unit seen in simulators.
Ultimate exclusively comes with advanced fine tunable signal processing to make the experience as personalized as humanly possible. This model was designed with “only the best is good enough” mindset.
SIMUCUBE Ultimate is a tribute to the Ultimate drivers. Scroll down for more feats and tech specs.
Need a wheel as well? Click here
Pivot Plate
- Pivot plate for fixing two aluminum profiles together
- Usually to mount a side monitor in a triple screen setup
- 40 degree scale for adjusting the pivot (+/- 20 degrees)
- Can be used in other than alu-profile rigs as well, if the construction is suitable
- Mounting holes are for M8 bolts
- Material: 5 mm aluminum, matte black
- Sold in kits of two and four
- Optional: M8 bolts, washers and T-nuts
- 8 pcs each if 2 plates selected
- 16 pcs each if 4 plates selected
Select options This product has multiple variants. The options may be chosen on the product page
Reviews
There are no reviews yet.