Be the first to review “Keyboard tray” Cancel reply
Keyboard tray
47.58€ (47.58€ tax 0 %)
- Width: 520 mm | Height 213 mm
- Angle is adjustable
- Steel, black powder coating
- Included:
- A joint and a 40 x 40 x 490 mm aluminium profile (see product pic)
- M8 T-nut and a bolt for mounting the tray to an aluminium profile rig
Out of stock
Related Products
![](https://simgrade.fi/wp-content/uploads/2020/08/side-brackets-500x500-1-240x240.jpg)
Seat side brackets Sabelt
- Sturdy side brackets from Sabelt
- To be used with seats that have lateral fixing
- Steel with 3 mm thickness
- Surface finish: black paint
- Mounting holes for M8 bolts
![](https://simgrade.fi/wp-content/uploads/2023/01/tnut-st-240x240.png)
T-nut for aluminum profile M6/M8
- Fits the ‘sim racing standard’ aluminum profile (see images)
- Typical profile sizes: 40×40, 40×80, 40×120, 40×160
- Self-aligns in the profile slot with spring loaded stainless steel ball
- The ball prevents unwanted movement in the slot
- Body material zinc plated steel
- Thread sizes M6 & M8 (in main image)
- Quantities available: 10 / 25 / 50 / 100 / 200
![](https://simgrade.fi/wp-content/uploads/2021/07/R1G-5-266-L-MOUNT-FOR-SCREEN-01-240x240.png)
Adjustable VESA plate
- Angle-adjustable mount for VESA 75 / VESA 100 compatible displays
- VESA 100 (100×100 mm pattern) is by far the most common type (also in 49″ Ultra / Super Ultra Wide displays)
- Can be mounted to practically any flat surface
- Usually mounted to aluminum profile (see pic)
- Angle can be adjusted without ‘steps’ as the adjusting is done with the M6 bolts
- This way the user can fine tune the angle / alignment exactly as wanted
- Included:
- M8 bolts – fixing the mount
- M6 bolts – angle adjustment
- M4 bolts – screen mounting (thread length: 10 mm)
- M4 spacers – screen mounting, used if necessary, depends on screen. Lengths: thread 8, body 10 mm
- Availability: 1 pc or 3 pcs
![](https://simgrade.fi/wp-content/uploads/2021/07/TSB3-240x240.jpg)
Display Stand Triple HD Black
- Sturdy, lean-free stand for a triple screen setup
- VESA 75/100 compatible
- Screen mounting plates are angle adjustable
- ‘Stepless’ fine tuning via M6 adjustment bolts ensures perfect aligning of the screens
- Height & width adjustable
- Vertical profiles
- Length: 112 cm | Inner distance max: 104 cm
- Bolts for screens included
![](https://simgrade.fi/wp-content/uploads/2022/09/tr-120-mk4-240x240.png)
Trak Racer TR120 MK4
The TR120 has been designed with experience gained since Trak Racer started in 2008. The base structure is 120 × 40mm high-end aluminium T-Slot extruded profile, anodized in black.
Your choice of wheel mount will be supported by 120 × 40mm high-end aluminium T-Slot extruded profile wheel uprights, also anodized in black and supported with Trak Racer-Signature Corner Brackets – mounted to the side for additional support.
Wheel base, pedals and shifter compatibilities ⇒ scroll down.
Need a display stand as well? Click here
![](https://simgrade.fi/wp-content/uploads/2020/07/desk.mount_.06-240x240.png)
Direct Drive Mount
- Compatibility:
- SIMUCUBE 2 Sport, Pro, Ultimate
- SIMUCUBE 1 and other ‘previous generation’ Direct Drive motors with MiGE 130ST 20/30 Nm motors, for example VRS Direct Force Pro
- Adjustable tilt angle
- Can be mounted basically to any flat surface
- Mounting pattern: 210 mm x 40 mm (width / depth). Holes are for M8 bolts and min. M6 is recommended.
- Fits the industry standard 80/20 aluminum profile when spec 40×80 mm or above is used
- Material: 4 mm steel
- Matte black
- #technotactical
![](https://simgrade.fi/wp-content/uploads/2021/08/pp1-240x240.png)
Pivot Plate
- Pivot plate for fixing two aluminum profiles together
- Usually to mount a side monitor in a triple screen setup
- 40 degree scale for adjusting the pivot (+/- 20 degrees)
- Can be used in other than alu-profile rigs as well, if the construction is suitable
- Mounting holes are for M8 bolts
- Material: 5 mm aluminum, matte black
- Sold in kits of two and four
- Optional: M8 bolts, washers and T-nuts
- 8 pcs each if 2 plates selected
- 16 pcs each if 4 plates selected
SALE !
36.29€ 23.39€ (23.39€ tax 0 %)
![](https://simgrade.fi/wp-content/uploads/2021/07/R1G-4-055-SCREEN-MOUNT-05-240x240.png)
Display Mount VESA 75-100
- Angle & distance adjustable display mount
- Compatible with the most common standards: VESA 75 / VESA 100
- Inner distance of the side plates: 120 mm
- Fits, for example: 40×120 mm aluminum profile (see pics)
- Steel with 5 mm thickness: extremely sturdy
- Matte black
- Mounting holes on the sides: for M8 bolts
- Mounting holes on the front: for M4 bolts (standard)
- Included: 4 pcs M4x10 bolts & 4 pcs M4 male-female standoffs
Reviews
There are no reviews yet.