SIMUCUBE 2 Sport 
Be the first to review “Direct Drive Mount” Cancel reply
Direct Drive Mount
47.01€ (47.01€ tax 0%)
- Compatibility:
- SIMUCUBE 2 Sport, Pro, Ultimate
- SIMUCUBE 1 and other ‘previous generation’ Direct Drive motors with MiGE 130ST 20/30 Nm motors, for example VRS Direct Force Pro
- Adjustable tilt angle
- Can be mounted basically to any flat surface
- Mounting pattern: 210 mm x 40 mm (width / depth). Holes are for M8 bolts and min. M6 is recommended.
- Fits the industry standard 80/20 aluminum profile when spec 40×80 mm or above is used
- Material: 4 mm steel
- Matte black
- #technotactical
In stock
Related Products
SIMUCUBE 2 Pro
25 Nm of torque is enough to give you deep immersion with any track, car and condition. With Pro one might forget they are in simulation.
Combined with exceptionally high torque response rate in Pro motor, the sharpest kinks will be delivered at a clarity not seen in Direct Drive scene before. Torque response rate is adjustable to driver’s preferences.
SIMUCUBE 2 Pro is here to set the new golden standard for high-end class Direct Drive wheels. Scroll down for more feats and tech specs.
Need a wheel as well? Click here
Quick Release for wheel sold separately. Link to product site.
Wheel deck
- Powder coated, matte black aluminium 10 mm
- Width 500 mm | Depth 194 mm
- For details, see product pic
- Compatibility
- SimGrade mount for Simucube 1 & 2
- Fanatec
- DD1 and DD2, CSR / CSW / CSW Adapter / CSL
- Logitech G25 / G27 / G29
- Thrustmaster T300 / T500RS and similar
- Note: Fixing bolts vary per wheel base and are not included. If you need bolts, mention it in order comments and we’ll try to fulfill your request.
SIMUCUBE Front Mount
- Compatibility:
- Simucube 2 Sport, Pro, Ultimate
- Simucube 1 and other ‘previous generation’ Direct Drive systems with MiGE motors 20/30 Nm
- 12 mm aluminium all plates
- Matte black
- Fits rigs with vertical profile (inner) distance 400-600 mm
- Horizontal slot holes: max. bolt distance 550 mm
- Adjustable tilt angle when side plates are used
- Usually mounted to the vertical profiles of an aluminum profile rig
- Multiple fixing points enable mounting to various types of (DIY) rigs
SIMUCUBE 2 Quick Release wheel side
- Already own or planning to buy an extra wheel for your Simucube 2 wheel base? Attach this quick release to your wheel and you are set.
- Wheel / rim compatibility:
- 6 x 70 mm pattern (by far the #1 standard)
- Also included 50.8 ➜ 70 mm pattern adapter
- Motor compatibility: Simucube 2 Sport, Pro and Ultimate
- Zero backlash = zero torque artifacts, crucial when no more than flawless force feedback feel is the target
- When locked in, equals a solid metal shaft. This is how it should be. And needs to be.
- Precision machined aluminium construction with black anodized surface finish
- 30 mm spacer (use when needed)
Display Stand Silver Triple HD
- Sturdy, lean-free stand for a triple screen setup
- VESA 75/100 compatible
- Screen mounting plates are angle adjustable
- ‘Stepless’ fine tuning via M6 adjustment bolts ensures perfect aligning of the screens
- Height & width adjustable
- Vertical profiles
- Length: 112 cm | Inner distance max: 104 cm
- Bolts for screens included
- Optional: top screen mount
Select options This product has multiple variants. The options may be chosen on the product page
SIMUCUBE 2 Ultimate
32 Nm of torque and maxed-out torque response rate is at your disposal at anytime. Ultimate is based on Austrian made maximally dynamic industrial motor optimized for simulation. It’s equipped with a 24 bit resolution Hiperface angle sensor to be fully utilized by the most advanced signal processing unit seen in simulators.
Ultimate exclusively comes with advanced fine tunable signal processing to make the experience as personalized as humanly possible. This model was designed with “only the best is good enough” mindset.
SIMUCUBE Ultimate is a tribute to the Ultimate drivers. Scroll down for more feats and tech specs.
Need a wheel as well? Click here
Steering Wheel Spacer 50mm
- Black anodized aluminium
- Length: 50 mm
- Standard 6 x 70 mm bolt pattern (for M5 bolts)
- Available in three lengths: 50/75/100 mm
- Use as an extension to bring steering wheel closer to the driver
SIMUCUBE 2 Prem. Torque Off
- For SIMUCUBE 2 Sport and Pro (supplied as a standard with Ultimate)
- Optional upgrade = not required with Sport & Pro but in case you wanna go premium
- Blue led for power status
- Switch for powering the wheelbase ON / OFF
- CNC machined aluminium construction
- Black anodized surface finish
- Cable included
- Supplied as standard in Simucube 2 Ultimate
Reviews
There are no reviews yet.