Be the first to review “Mouse plate” Cancel reply
- You cannot add "Display Mount VESA 75-100" to the cart because the product is out of stock.
Mouse plate
23.11€ (23.11€ tax 0%)
- Can be mounted to alum. rig or almost any other material with the included angle bracket (see pics)
- Width 290 mm, depth 210 mm
- Steel with 3 mm thickness
- Surface: black powder coating
- 3 x countersunk holes for M6 bolts (included)
- Included in delivery:
- M6 T-nuts for alum. profile
- 40 x 40 alum. profile, L=440 mm
- Angle bracket and bracket cover for fixing the profile to a rig
- 2 x M8 t-nut
- 2 x M8 bolt
Out of stock
Related Products
Display Stand Triple HD Black
- Sturdy, lean-free stand for a triple screen setup
- VESA 75/100 compatible
- Screen mounting plates are angle adjustable
- ‘Stepless’ fine tuning via M6 adjustment bolts ensures perfect aligning of the screens
- Height & width adjustable
- Vertical profiles
- Length: 112 cm | Inner distance max: 104 cm
- Bolts for screens included
Adjustable VESA plate
- Angle-adjustable mount for VESA 75 / VESA 100 compatible displays
- VESA 100 (100×100 mm pattern) is by far the most common type (also in 49″ Ultra / Super Ultra Wide displays)
- Can be mounted to practically any flat surface
- Usually mounted to aluminum profile (see pic)
- Angle can be adjusted without ‘steps’ as the adjusting is done with the M6 bolts
- This way the user can fine tune the angle / alignment exactly as wanted
- Included:
- M8 bolts – fixing the mount
- M6 bolts – angle adjustment
- M4 bolts – screen mounting (thread length: 10 mm)
- M4 spacers – screen mounting, used if necessary, depends on screen. Lengths: thread 8, body 10 mm
- Availability: 1 pc or 3 pcs
Select options This product has multiple variants. The options may be chosen on the product page
Seat sliders Sparco
- High quality seat sliders from Sparco
- Longitudinal mounting hole distance 271 mm
- No FIA approval
- For lateral type mounting, side brackets are required
- If seat is bottom mount type (common in tubular frame seats and reclining seats), sliders can be fixed directly to the seat without side brackets
- Heavy duty version available here
Display Stand Light
- Light but sturdy aluminum stand for displays up to 49″
- VESA 100 and VESA 75 compatible
- Available in two colors / finishes:
- Black anodized
- Natural anodized (light grey)
- As the stand is not fixed to the rig
- Distance from user is easily adjustable
- Vibration from a powerful wheel base like direct drive can’t reach the display (which might harm the display over time)
- If needed, TV and other brackets are usually easy to mount to the slot profile (note: accessories like bolts etc. not included, varies between display manufacturers)
- Measurements:
- Floor profiles: 700 mm
- Vertical profiles: 1100 mm
- Inner width 700 mm
Select options This product has multiple variants. The options may be chosen on the product page
Trak Racer TR160 MK4
The TR160, the King of the Rigs, has been designed with experience gained since Trak Racer started in 2008. The base structure is 160 × 40mm high-end aluminium T-Slot extruded profile, anodized in black.
Your choice of wheel mount will be supported by 160 × 40mm high-end aluminium T-Slot extruded profile wheel uprights, also anodized in black and supported with Trak Racer-Signature Corner Brackets – mounted to the side for additional support.
Wheel bases, pedals and other compatibility ⇒ scroll down.
Need a display stand as well? Click here
Select options This product has multiple variants. The options may be chosen on the product page
Display Stand Silver Triple HD
- Sturdy, lean-free stand for a triple screen setup
- VESA 75/100 compatible
- Screen mounting plates are angle adjustable
- ‘Stepless’ fine tuning via M6 adjustment bolts ensures perfect aligning of the screens
- Height & width adjustable
- Vertical profiles
- Length: 112 cm | Inner distance max: 104 cm
- Bolts for screens included
- Optional: top screen mount
Select options This product has multiple variants. The options may be chosen on the product page
T-nut for aluminum profile M6/M8
- Fits the ‘sim racing standard’ aluminum profile (see images)
- Typical profile sizes: 40×40, 40×80, 40×120, 40×160
- Self-aligns in the profile slot with spring loaded stainless steel ball
- The ball prevents unwanted movement in the slot
- Body material zinc plated steel
- Thread sizes M6 & M8 (in main image)
- Quantities available: 10 / 25 / 50 / 100 / 200
Select options This product has multiple variants. The options may be chosen on the product page
Bracket with cover, option: bolt & t-nut
- Available with / without bolts & t-nuts
- Qtys to choose from: 5 / 10 / 25 / 50 / 100 pcs
- Can be used for for connecting
- Aluminum profiles
- Plates
- Sim racing hardware
- DIY components
- Other elements
- Basically any solid material
- Height & depth: 36mm | Width: 38 mm
- Bolt type: DIN 7380 M8x16 with flange
- High strength class: 10.9
- Flange bolt provides stronger connection vs regular bolt
- T-nuts: Steel with M8 thread and spring loaded ball
- Note: if you choose to order bolts and T-nuts, qty for both is automatically 2 x bracket qty
Select options This product has multiple variants. The options may be chosen on the product page
Reviews
There are no reviews yet.