Side support for VX-PRO pedals 
Be the first to review “Heel support & stopper “per foot”” Cancel reply
Heel support & stopper “per foot”
15.14€ – 31.08€
- Universal heel support / stopper
- Slot holes: distance adjustable
- Aluminum, matte black
- Can be mounted to practically any flat surface
- Countersunk slot holes for distance adjustment
- With individual plates per pedal, user preference can be matched 100 %
- 4 x bolts & T-nuts included per plate
- 1 / 2 / 3 pcs available
- Overall length: 118 mm | Width: 100 mm
Related Products
Adjustable VESA plate
- Angle-adjustable mount for VESA 75 / VESA 100 compatible displays
- VESA 100 (100×100 mm pattern) is by far the most common type (also in 49″ Ultra / Super Ultra Wide displays)
- Can be mounted to practically any flat surface
- Usually mounted to aluminum profile (see pic)
- Angle can be adjusted without ‘steps’ as the adjusting is done with the M6 bolts
- This way the user can fine tune the angle / alignment exactly as wanted
- Included:
- M8 bolts – fixing the mount
- M6 bolts – angle adjustment
- M4 bolts – screen mounting (thread length: 10 mm)
- M4 spacers – screen mounting, used if necessary, depends on screen. Lengths: thread 8, body 10 mm
- Availability: 1 pc or 3 pcs
Select options This product has multiple variants. The options may be chosen on the product page
Display Stand Silver Triple HD
- Sturdy, lean-free stand for a triple screen setup
- VESA 75/100 compatible
- Screen mounting plates are angle adjustable
- ‘Stepless’ fine tuning via M6 adjustment bolts ensures perfect aligning of the screens
- Height & width adjustable
- Vertical profiles
- Length: 112 cm | Inner distance max: 104 cm
- Bolts for screens included
- Optional: top screen mount
Select options This product has multiple variants. The options may be chosen on the product page
Heusinkveld Sprint base plate
- Solid platform to mount Sprint pedals on your rig
- Mounting points are slots allowing lateral adjustment per individual pedal: 29 mm for brake, 24 mm for throttle & clutch
- Height adjustable heel plate, options: 0/20/40 mm
- Mounting hardware is supplied to mount the pedals to the base plate, as well as hardware to mount the base plate to a 6 mm thick underlying plate
- Powder coated anthacite grey & bead blasted semi-gloss surface finish
VX-PRO Brake Kit V1
- Optional brake kit for VX-PRO pedals
- Provides extra adjustment range
- Two softer springs (compared to default yellow)
- Red: medium
- Blue: soft
- New side plates
- Available load bearing positions (four) differ from the stock plates, see last product image
- Red line depicts the stock side plate, black line the Brake Kit V1 version. This design allows extra brake configurations to find & match driver preference perfectly.
- Top position is higher than in the stock plates, creating a ‘maxxed-out’ stiffness configuration (with the yellow spring)
- Available load bearing positions (four) differ from the stock plates, see last product image
- The springs included can be used with stock side plates and the kit side plates with yellow default spring
R7 Advanced Brake Kit 2.0
- Optional brake kit for R7 pedals (Spec C)
- Included:
- Two pushrod packs (see arrows in the main image)
- All required bolts, nuts & washers for mounting the kit to R7 Spec C pedals
- With this brake kit you can fine tune the the R7 pedals even further to your liking
Sale!
Original price was: 35.86€.23.11€Current price is: 23.11€. (23.11€ tax 0%)
Display Mount VESA 75-100
- Angle & distance adjustable display mount
- Compatible with the most common standards: VESA 75 / VESA 100
- Inner distance of the side plates: 120 mm
- Fits, for example: 40×120 mm aluminum profile (see pics)
- Steel with 5 mm thickness: extremely sturdy
- Matte black
- Mounting holes on the sides: for M8 bolts
- Mounting holes on the front: for M4 bolts (standard)
- Included: 4 pcs M4x10 bolts & 4 pcs M4 male-female standoffs
31.08€ (31.08€ tax 0%)
Thera Clutch
- Billet aluminum, black anodized finish
- Stainless steel ball bearings in all major pivot points
- Ultra smooth operation ensured by using ball bearings
- Zero lateral play
- No lubrication required
- Silent operation by design
- No metal-to-metal contact on end stoppers
- Mounting: 4 x M6 bolts, mounting pattern (click to open) 80 x 24 mm
- 5 year warranty
- Designed, manufactured and assembled in Finland 🇫🇮
Reviews
There are no reviews yet.