Direct Drive Mount 
Be the first to review “Display Mount VESA 75-100” Cancel reply
Sale!
Display Mount VESA 75-100
Original price was: 35.86€.23.11€Current price is: 23.11€. (23.11€ tax 0%)
- Angle & distance adjustable display mount
- Compatible with the most common standards: VESA 75 / VESA 100
- Inner distance of the side plates: 120 mm
- Fits, for example: 40×120 mm aluminum profile (see pics)
- Steel with 5 mm thickness: extremely sturdy
- Matte black
- Mounting holes on the sides: for M8 bolts
- Mounting holes on the front: for M4 bolts (standard)
- Included: 4 pcs M4x10 bolts & 4 pcs M4 male-female standoffs
Out of stock
Related Products
Adjustable VESA plate
- Angle-adjustable mount for VESA 75 / VESA 100 compatible displays
- VESA 100 (100×100 mm pattern) is by far the most common type (also in 49″ Ultra / Super Ultra Wide displays)
- Can be mounted to practically any flat surface
- Usually mounted to aluminum profile (see pic)
- Angle can be adjusted without ‘steps’ as the adjusting is done with the M6 bolts
- This way the user can fine tune the angle / alignment exactly as wanted
- Included:
- M8 bolts – fixing the mount
- M6 bolts – angle adjustment
- M4 bolts – screen mounting (thread length: 10 mm)
- M4 spacers – screen mounting, used if necessary, depends on screen. Lengths: thread 8, body 10 mm
- Availability: 1 pc or 3 pcs
Select options This product has multiple variants. The options may be chosen on the product page
SIMUCUBE Front Mount
- Compatibility:
- Simucube 2 Sport, Pro, Ultimate
- Simucube 1 and other ‘previous generation’ Direct Drive systems with MiGE motors 20/30 Nm
- 12 mm aluminium all plates
- Matte black
- Fits rigs with vertical profile (inner) distance 400-600 mm
- Horizontal slot holes: max. bolt distance 550 mm
- Adjustable tilt angle when side plates are used
- Usually mounted to the vertical profiles of an aluminum profile rig
- Multiple fixing points enable mounting to various types of (DIY) rigs
Display Stand HD
- Heavy duty stand for displays up to 65″
- VESA 100 and VESA 75 compatible
- Available in two colors / finishes:
- Black anodized
- Natural anodized (light grey)
- Bolt-through-profile fixing method used in the vertical profiles
- As the stand is not fixed to the rig
- Distance from user is easily adjustable
- Vibration from a powerful wheel base like direct drive can’t reach the display (which might harm the display over time)
- If needed, TV and other brackets are usually easy to mount to the aluminum slot profile (note: accessories like bolts etc. not included, varies between display manufacturers)
- Measurements
- Floor profiles: 700 mm
- Vertical profiles: 1100 mm
- Inner width: 700 mm
Select options This product has multiple variants. The options may be chosen on the product page
Seat sliders Sparco
- High quality seat sliders from Sparco
- Longitudinal mounting hole distance 271 mm
- No FIA approval
- For lateral type mounting, side brackets are required
- If seat is bottom mount type (common in tubular frame seats and reclining seats), sliders can be fixed directly to the seat without side brackets
- Heavy duty version available here
Trak Racer TR160 MK4
The TR160, the King of the Rigs, has been designed with experience gained since Trak Racer started in 2008. The base structure is 160 × 40mm high-end aluminium T-Slot extruded profile, anodized in black.
Your choice of wheel mount will be supported by 160 × 40mm high-end aluminium T-Slot extruded profile wheel uprights, also anodized in black and supported with Trak Racer-Signature Corner Brackets – mounted to the side for additional support.
Wheel bases, pedals and other compatibility ⇒ scroll down.
Need a display stand as well? Click here
Select options This product has multiple variants. The options may be chosen on the product page
Bracket with cover, option: bolt & t-nut
- Available with / without bolts & t-nuts
- Qtys to choose from: 5 / 10 / 25 / 50 / 100 pcs
- Can be used for for connecting
- Aluminum profiles
- Plates
- Sim racing hardware
- DIY components
- Other elements
- Basically any solid material
- Height & depth: 36mm | Width: 38 mm
- Bolt type: DIN 7380 M8x16 with flange
- High strength class: 10.9
- Flange bolt provides stronger connection vs regular bolt
- T-nuts: Steel with M8 thread and spring loaded ball
- Note: if you choose to order bolts and T-nuts, qty for both is automatically 2 x bracket qty
Select options This product has multiple variants. The options may be chosen on the product page
39€ (39€ tax 0%)
Seat sliders Sparco HD
- Heavy Duty seat sliders from Sparco
- Sturdier construction vs. the standard sliders
- Mounting hole longitudinal distance 271 mm
- No FIA approval
Reviews
There are no reviews yet.