Be the first to review “Display Stand Light” Cancel reply
Display Stand Light
158.57€ – 198.41€
- Light but sturdy aluminum stand for displays up to 49″
- VESA 100 and VESA 75 compatible
- Available in two colors / finishes:
- Black anodized
- Natural anodized (light grey)
- As the stand is not fixed to the rig
- Distance from user is easily adjustable
- Vibration from a powerful wheel base like direct drive can’t reach the display (which might harm the display over time)
- If needed, TV and other brackets are usually easy to mount to the slot profile (note: accessories like bolts etc. not included, varies between display manufacturers)
- Measurements:
- Floor profiles: 700 mm
- Vertical profiles: 1100 mm
- Inner width 700 mm
Related Products
Wheel deck
- Powder coated, matte black aluminium 10 mm
- Width 500 mm | Depth 194 mm
- For details, see product pic
- Compatibility
- SimGrade mount for Simucube 1 & 2
- Fanatec
- DD1 and DD2, CSR / CSW / CSW Adapter / CSL
- Logitech G25 / G27 / G29
- Thrustmaster T300 / T500RS and similar
- Note: Fixing bolts vary per wheel base and are not included. If you need bolts, mention it in order comments and we’ll try to fulfill your request.
Display Stand Triple HD Black
- Sturdy, lean-free stand for a triple screen setup
- VESA 75/100 compatible
- Screen mounting plates are angle adjustable
- ‘Stepless’ fine tuning via M6 adjustment bolts ensures perfect aligning of the screens
- Height & width adjustable
- Vertical profiles
- Length: 112 cm | Inner distance max: 104 cm
- Bolts for screens included
SIMUCUBE Front Mount
- Compatibility:
- Simucube 2 Sport, Pro, Ultimate
- Simucube 1 and other ‘previous generation’ Direct Drive systems with MiGE motors 20/30 Nm
- 12 mm aluminium all plates
- Matte black
- Fits rigs with vertical profile (inner) distance 400-600 mm
- Horizontal slot holes: max. bolt distance 550 mm
- Adjustable tilt angle when side plates are used
- Usually mounted to the vertical profiles of an aluminum profile rig
- Multiple fixing points enable mounting to various types of (DIY) rigs
Pivot Plate
- Pivot plate for fixing two aluminum profiles together
- Usually to mount a side monitor in a triple screen setup
- 40 degree scale for adjusting the pivot (+/- 20 degrees)
- Can be used in other than alu-profile rigs as well, if the construction is suitable
- Mounting holes are for M8 bolts
- Material: 5 mm aluminum, matte black
- Sold in kits of two and four
- Optional: M8 bolts, washers and T-nuts
- 8 pcs each if 2 plates selected
- 16 pcs each if 4 plates selected
Select options This product has multiple variants. The options may be chosen on the product page
Mouse plate
- Can be mounted to alum. rig or almost any other material with the included angle bracket (see pics)
- Width 290 mm, depth 210 mm
- Steel with 3 mm thickness
- Surface: black powder coating
- 3 x countersunk holes for M6 bolts (included)
- Included in delivery:
- M6 T-nuts for alum. profile
- 40 x 40 alum. profile, L=440 mm
- Angle bracket and bracket cover for fixing the profile to a rig
- 2 x M8 t-nut
- 2 x M8 bolt
Heel support & stopper “per foot”
- Universal heel support / stopper
- Slot holes: distance adjustable
- Aluminum, matte black
- Can be mounted to practically any flat surface
- Countersunk slot holes for distance adjustment
- With individual plates per pedal, user preference can be matched 100 %
- 4 x bolts & T-nuts included per plate
- 1 / 2 / 3 pcs available
- Overall length: 118 mm | Width: 100 mm
Select options This product has multiple variants. The options may be chosen on the product page
Adjustable VESA plate
- Angle-adjustable mount for VESA 75 / VESA 100 compatible displays
- VESA 100 (100×100 mm pattern) is by far the most common type (also in 49″ Ultra / Super Ultra Wide displays)
- Can be mounted to practically any flat surface
- Usually mounted to aluminum profile (see pic)
- Angle can be adjusted without ‘steps’ as the adjusting is done with the M6 bolts
- This way the user can fine tune the angle / alignment exactly as wanted
- Included:
- M8 bolts – fixing the mount
- M6 bolts – angle adjustment
- M4 bolts – screen mounting (thread length: 10 mm)
- M4 spacers – screen mounting, used if necessary, depends on screen. Lengths: thread 8, body 10 mm
- Availability: 1 pc or 3 pcs
Select options This product has multiple variants. The options may be chosen on the product page
Seat sliders Sparco
- High quality seat sliders from Sparco
- Longitudinal mounting hole distance 271 mm
- No FIA approval
- For lateral type mounting, side brackets are required
- If seat is bottom mount type (common in tubular frame seats and reclining seats), sliders can be fixed directly to the seat without side brackets
- Heavy duty version available here
Reviews
There are no reviews yet.