Direct Drive Mount 
Be the first to review “Adjustable VESA plate” Cancel reply
Adjustable VESA plate
23.11€ – 54.98€
- Angle-adjustable mount for VESA 75 / VESA 100 compatible displays
- VESA 100 (100×100 mm pattern) is by far the most common type (also in 49″ Ultra / Super Ultra Wide displays)
- Can be mounted to practically any flat surface
- Usually mounted to aluminum profile (see pic)
- Angle can be adjusted without ‘steps’ as the adjusting is done with the M6 bolts
- This way the user can fine tune the angle / alignment exactly as wanted
- Included:
- M8 bolts – fixing the mount
- M6 bolts – angle adjustment
- M4 bolts – screen mounting (thread length: 10 mm)
- M4 spacers – screen mounting, used if necessary, depends on screen. Lengths: thread 8, body 10 mm
- Availability: 1 pc or 3 pcs
Related Products
Seat side brackets Sabelt
- Sturdy side brackets from Sabelt
- To be used with seats that have lateral fixing
- Steel with 3 mm thickness
- Surface finish: black paint
- Mounting holes for M8 bolts
Trak Racer TR160 MK4
The TR160, the King of the Rigs, has been designed with experience gained since Trak Racer started in 2008. The base structure is 160 × 40mm high-end aluminium T-Slot extruded profile, anodized in black.
Your choice of wheel mount will be supported by 160 × 40mm high-end aluminium T-Slot extruded profile wheel uprights, also anodized in black and supported with Trak Racer-Signature Corner Brackets – mounted to the side for additional support.
Wheel bases, pedals and other compatibility ⇒ scroll down.
Need a display stand as well? Click here
Select options This product has multiple variants. The options may be chosen on the product page
31.08€ (31.08€ tax 0%)
Wheel deck
- Powder coated, matte black aluminium 10 mm
- Width 500 mm | Depth 194 mm
- For details, see product pic
- Compatibility
- SimGrade mount for Simucube 1 & 2
- Fanatec
- DD1 and DD2, CSR / CSW / CSW Adapter / CSL
- Logitech G25 / G27 / G29
- Thrustmaster T300 / T500RS and similar
- Note: Fixing bolts vary per wheel base and are not included. If you need bolts, mention it in order comments and we’ll try to fulfill your request.
Pivot Plate
- Pivot plate for fixing two aluminum profiles together
- Usually to mount a side monitor in a triple screen setup
- 40 degree scale for adjusting the pivot (+/- 20 degrees)
- Can be used in other than alu-profile rigs as well, if the construction is suitable
- Mounting holes are for M8 bolts
- Material: 5 mm aluminum, matte black
- Sold in kits of two and four
- Optional: M8 bolts, washers and T-nuts
- 8 pcs each if 2 plates selected
- 16 pcs each if 4 plates selected
Select options This product has multiple variants. The options may be chosen on the product page
Display Stand HD
- Heavy duty stand for displays up to 65″
- VESA 100 and VESA 75 compatible
- Available in two colors / finishes:
- Black anodized
- Natural anodized (light grey)
- Bolt-through-profile fixing method used in the vertical profiles
- As the stand is not fixed to the rig
- Distance from user is easily adjustable
- Vibration from a powerful wheel base like direct drive can’t reach the display (which might harm the display over time)
- If needed, TV and other brackets are usually easy to mount to the aluminum slot profile (note: accessories like bolts etc. not included, varies between display manufacturers)
- Measurements
- Floor profiles: 700 mm
- Vertical profiles: 1100 mm
- Inner width: 700 mm
Select options This product has multiple variants. The options may be chosen on the product page
Display Stand Light
- Light but sturdy aluminum stand for displays up to 49″
- VESA 100 and VESA 75 compatible
- Available in two colors / finishes:
- Black anodized
- Natural anodized (light grey)
- As the stand is not fixed to the rig
- Distance from user is easily adjustable
- Vibration from a powerful wheel base like direct drive can’t reach the display (which might harm the display over time)
- If needed, TV and other brackets are usually easy to mount to the slot profile (note: accessories like bolts etc. not included, varies between display manufacturers)
- Measurements:
- Floor profiles: 700 mm
- Vertical profiles: 1100 mm
- Inner width 700 mm
Select options This product has multiple variants. The options may be chosen on the product page
T-nut for aluminum profile M6/M8
- Fits the ‘sim racing standard’ aluminum profile (see images)
- Typical profile sizes: 40×40, 40×80, 40×120, 40×160
- Self-aligns in the profile slot with spring loaded stainless steel ball
- The ball prevents unwanted movement in the slot
- Body material zinc plated steel
- Thread sizes M6 & M8 (in main image)
- Quantities available: 10 / 25 / 50 / 100 / 200
Select options This product has multiple variants. The options may be chosen on the product page
Reviews
There are no reviews yet.