Tilting heel support for VX-PRO pedals 
Be the first to review “SIMUCUBE Mount” Cancel reply
SIMUCUBE Mount
54.98€ (54.98€ tax 0%)
SPECIFICATIONS:
Maximum height 185 mm, minimum height 155 mm, width 164 mm, depth 128 mm
Net weight 1.3 kg
Max 20 degree tilt angle (Sport & Pro)
Max 12.5 degree*) tilt angle (Ultimate)
*if the rear of the Ultimate wheelbase touches the surfaceMaterial: 3 mm steel
78.4 mm x 66 mm hole pattern is compatible with many readily available deck mounts
Screws included in the package:
4 x M5x10 button head
4 x M5 washer
4 x M8x25 button head
4 x M8 washer
4 x M8 nyloc nut
4 x M6x12 cap head screw
4 x M6 washer
Out of stock
Related Products
Direct Drive Mount
- Compatibility:
- SIMUCUBE 2 Sport, Pro, Ultimate
- SIMUCUBE 1 and other ‘previous generation’ Direct Drive motors with MiGE 130ST 20/30 Nm motors, for example VRS Direct Force Pro
- Adjustable tilt angle
- Can be mounted basically to any flat surface
- Mounting pattern: 210 mm x 40 mm (width / depth). Holes are for M8 bolts and min. M6 is recommended.
- Fits the industry standard 80/20 aluminum profile when spec 40×80 mm or above is used
- Material: 4 mm steel
- Matte black
- #technotactical
VX-PRO Brake Kit V1
- Optional brake kit for VX-PRO pedals
- Provides extra adjustment range
- Two softer springs (compared to default yellow)
- Red: medium
- Blue: soft
- New side plates
- Available load bearing positions (four) differ from the stock plates, see last product image
- Red line depicts the stock side plate, black line the Brake Kit V1 version. This design allows extra brake configurations to find & match driver preference perfectly.
- Top position is higher than in the stock plates, creating a ‘maxxed-out’ stiffness configuration (with the yellow spring)
- Available load bearing positions (four) differ from the stock plates, see last product image
- The springs included can be used with stock side plates and the kit side plates with yellow default spring
Steering Wheel Spacer 100mm
- Black anodized aluminium
- Length: 100 mm
- Standard 6 x 70 mm bolt pattern (for M5 bolts)
- Other available lengths: 50 & 75 mm
- Use as an extension to bring steering wheel closer to the driver
R7 Advanced Brake Kit 2.0
- Optional brake kit for R7 pedals (Spec C)
- Included:
- Two pushrod packs (see arrows in the main image)
- All required bolts, nuts & washers for mounting the kit to R7 Spec C pedals
- With this brake kit you can fine tune the the R7 pedals even further to your liking
Q1R quick release
- The original Q1R quick release mechanism
- Absolute zero backlash and play
- 6 x 70 mm bolt pattern for M5 bolts
- Quick and easy-to-use latch operation
BUNDLE: R7 Pedals + Wheel
CHOOSE A PEDAL SET + WHEEL AND GET GREAT VALUE WITH THIS BUNDLE DEAL! 🏁
PEDAL OPTIONS:
- R7 Pedals 2-pedal or 3-pedal set
WHEEL OPTIONS:
- Ascher Racing F28-SC V2 Formula wheel
- Ascher Racing F64-USB V3 Formula wheel
- GT Wheel Premium OMP
- Rally Wheel Premium Sparco
See also: SIMUCUBE 2 wheel side Quick Release
PRICING TABLE: HERE
Select options This product has multiple variants. The options may be chosen on the product page
Trak Racer TR160 MK4
The TR160, the King of the Rigs, has been designed with experience gained since Trak Racer started in 2008. The base structure is 160 × 40mm high-end aluminium T-Slot extruded profile, anodized in black.
Your choice of wheel mount will be supported by 160 × 40mm high-end aluminium T-Slot extruded profile wheel uprights, also anodized in black and supported with Trak Racer-Signature Corner Brackets – mounted to the side for additional support.
Wheel bases, pedals and other compatibility ⇒ scroll down.
Need a display stand as well? Click here
Select options This product has multiple variants. The options may be chosen on the product page
Heel Stopper
- Sturdy, adjustable heel stopper
- Steel with 3 mm thickness
- Matte black surface finish
- Dimensions: see product image
- Mounting with M6 (or smaller) bolts. M6 bolts included.
- Compatible with Pedal base plate
Reviews
There are no reviews yet.