SIMUCUBE 2 Prem. Torque Off 
Be the first to review “SIMUCUBE Mount” Cancel reply
SIMUCUBE Mount
54.98€ (54.98€ tax 0 %)
SPECIFICATIONS:
Maximum height 185 mm, minimum height 155 mm, width 164 mm, depth 128 mm
Net weight 1.3 kg
Max 20 degree tilt angle (Sport & Pro)
Max 12.5 degree*) tilt angle (Ultimate)
*if the rear of the Ultimate wheelbase touches the surfaceMaterial: 3 mm steel
78.4 mm x 66 mm hole pattern is compatible with many readily available deck mounts
Screws included in the package:
4 x M5x10 button head
4 x M5 washer
4 x M8x25 button head
4 x M8 washer
4 x M8 nyloc nut
4 x M6x12 cap head screw
4 x M6 washer
Out of stock
Related Products
Q1R wheel side 70 mm
- Wheel side of the famous Q1R mechanism
- 6 x 70 mm bolt pattern for M5 bolts
- Backlash and play equal zero by definition
Q1R quick release
- The original Q1R quick release mechanism
- Absolute zero backlash and play
- 6 x 70 mm bolt pattern for M5 bolts
- Quick and easy-to-use latch operation
Direct Drive Mount
- Compatibility:
- SIMUCUBE 2 Sport, Pro, Ultimate
- SIMUCUBE 1 and other ‘previous generation’ Direct Drive motors with MiGE 130ST 20/30 Nm motors, for example VRS Direct Force Pro
- Adjustable tilt angle
- Can be mounted basically to any flat surface
- Mounting pattern: 210 mm x 40 mm (width / depth). Holes are for M8 bolts and min. M6 is recommended.
- Fits the industry standard 80/20 aluminum profile when spec 40×80 mm or above is used
- Material: 4 mm steel
- Matte black
- #technotactical
Wheel deck
- Powder coated, matte black aluminium 10 mm
- Width 500 mm | Depth 194 mm
- For details, see product pic
- Compatibility
- SimGrade mount for Simucube 1 & 2
- Fanatec
- DD1 and DD2, CSR / CSW / CSW Adapter / CSL
- Logitech G25 / G27 / G29
- Thrustmaster T300 / T500RS and similar
- Note: Fixing bolts vary per wheel base and are not included. If you need bolts, mention it in order comments and we’ll try to fulfill your request.
SIMUCUBE 2 Sport
Sport comes with 17 Nm of direct drive torque and SIMUCUBE 2 benefits. This wheel base is a match for Sim Racing enthusiasts.
SC2 Sport delivers serious amount of juice to bring up adrenaline filled sweat to the skins of drivers. Sport has comparable responsiveness and signal processing of the top-end models of world famous SIMUCUBE 1
Sport will be your key to the club of sim racing champions. Scroll down for more feats and tech specs.
Need a wheel too? Click here
Quick Release for wheel sold separately. Link to product site.
SIMUCUBE 2 Ultimate
32 Nm of torque and maxed-out torque response rate is at your disposal at anytime. Ultimate is based on Austrian made maximally dynamic industrial motor optimized for simulation. It’s equipped with a 24 bit resolution Hiperface angle sensor to be fully utilized by the most advanced signal processing unit seen in simulators.
Ultimate exclusively comes with advanced fine tunable signal processing to make the experience as personalized as humanly possible. This model was designed with “only the best is good enough” mindset.
SIMUCUBE Ultimate is a tribute to the Ultimate drivers. Scroll down for more feats and tech specs.
Need a wheel as well? Click here
SIMUCUBE 2 Prem. Torque Off
- For SIMUCUBE 2 Sport and Pro (supplied as a standard with Ultimate)
- Optional upgrade = not required with Sport & Pro but in case you wanna go premium
- Blue led for power status
- Switch for powering the wheelbase ON / OFF
- CNC machined aluminium construction
- Black anodized surface finish
- Cable included
- Supplied as standard in Simucube 2 Ultimate
Rexing GT Wheel Timun v1.1
- Full carbon fiber body
- 4.3″ USBD480 LCD display compatible with popular sim racing software applications such as Simdash, Simhub and Z1
- 11 RGB LEDs, 6 additional marshal RGB LEDs: all configurable to telemetry data. Adjustable brightness (using a potentiometer on the wheel), and wide variety of colors to choose from
- 10 illuminated, dimmable push-buttons. Push buttons are high quality “Apem” brand with actuation force of 3.5 N and push travel of 1 mm
- 2 x Multi-switch which functions simultaneously as a rotary encoder, a digital joystick and a button
- 2 “Elma” brand thumb rotary encoders
- Original Alcantara® grips: superior quality and feel
- Weight: 1150 g | Diameter 320 mm | Grip thickest section 42 x 26 mm
READ MORE: SCROLL DOWN
EN 
FI
Reviews
There are no reviews yet.