Triple screen stand black 
SIMUCUBE Front Mount
149 € (120.16 € tax 0 %)
- Compatibility:
- Simucube 2 Sport, Pro, Ultimate
- Simucube 1 and other ‘previous generation’ Direct Drive systems with MiGE motors 20/30 Nm
- 12 mm aluminium all plates
- Matte black
- Fits rigs with vertical profile (inner) distance 400-600 mm
- Horizontal slot holes: max. bolt distance 550 mm
- Adjustable tilt angle when side plates are used
- Usually mounted to the vertical profiles of an aluminum profile rig
- Multiple fixing points enable mounting to various types of (DIY) rigs
Out of stock
Related Products
Basic frame 120
- Already have mounts/plates for pedals, wheel base and seat? Fix them to this frame and you are set.
- See also: our rig accessories
- Measurements (cm):
- Length 140 | Height 72 | Width 58
- Included in delivery:
- 20 x angle brackets with black covers
- 40 x T-nuts with M8 thread
- 40 x M8 bolts
- Black cover caps for profile ends
- Need extra parts? Ask us at info@simgrade.fi
Steering wheel spacer 100 mm
- Black anodized aluminium
- Length: 100 mm
- Standard 6 x 70 mm bolt pattern (for M5 bolts)
- Other available lengths: 50 & 75 mm
- Use as an extension to bring steering wheel closer to the driver
Simucube 2 Prem. Torque Off
- For Simucube 2 Sport and Pro (supplied as a standard with Ultimate)
- Optional upgrade = not required with Sport & Pro but in case you wanna go premium
- Blue led for power status
- Switch for powering the wheelbase ON / OFF
- CNC machined aluminium construction
- Black anodized surface finish
- Cable included
- Supplied as standard in Simucube 2 Ultimate
SIMUCUBE 2 Ultimate
32 Nm of torque and maxed-out torque response rate is at your disposal at anytime. Ultimate is based on Austrian made maximally dynamic industrial motor optimized for simulation. It’s equipped with a 24 bit resolution Hiperface angle sensor to be fully utilized by the most advanced signal processing unit seen in simulators.
Ultimate exclusively comes with advanced fine tunable signal processing to make the experience as personalized as humanly possible. This model was designed with “only the best is good enough” mindset.
SIMUCUBE Ultimate is a tribute to the Ultimate drivers. Scroll down for more feats and tech specs.
Need a wheel as well? Click here
Free of charge when buying SIMUCUBE Ultimate: Desk Mount. (mention the mount in order comment field if you’d like one)
Wheel deck
- Powder coated, matte black aluminium 10 mm
- Width 500 mm | Depth 194 mm
- For details, see product pic
- Compatibility
- SimGrade mount for Simucube 1 & 2
- Fanatec
- DD1 and DD2, CSR / CSW / CSW Adapter / CSL
- Logitech G25 / G27 / G29
- Thrustmaster T300 / T500RS and similar
- Note: Fixing bolts vary per wheel base and are not included. If you need bolts, mention it in order comments and we’ll try to fulfill your request.
Direct Drive Mount
- Compatibility:
- Simucube 2 Sport, Pro, Ultimate
- Simucube 1 and other ‘previous generation’ Direct Drive motors with MiGE 130ST 20/30 Nm motors, for example VRS Direct Force Pro
- Adjustable tilt angle
- Can be mounted basically to any flat surface
- Mounting pattern: 210 mm x 40 mm (width / depth). Holes are for M8 bolts and min. M6 is recommended.
- Fits the industry standard 80/20 aluminum profile when spec 40×80 mm or above is used
- Material: 4 mm steel
- Matte black
- #technotactical
Display Mount VESA 75-100
- Angle & distance adjustable display mount
- Compatible with the most common standards: VESA 75 / VESA 100
- Inner distance of the side plates: 120 mm
- Fits, for example: 40×120 mm aluminum profile (see pics)
- Steel with 5 mm thickness: extremely sturdy
- Matte black
- Mounting holes on the sides: for M8 bolts
- Mounting holes on the front: for M4 bolts (standard)
- Included: 4 pcs M4x10 bolts & 4 pcs M4 male-female standoffs
Triple screen stand
- Sturdy, lean-free stand for a triple screen setup
- VESA 75/100 compatible
- Screen mounting plates are angle adjustable
- ‘Stepless’ fine tuning via M6 adjustment bolts ensures perfect aligning of the screens
- Height & width adjustable
- Vertical profiles
- Length: 112 cm | Inner distance max: 104 cm
- Bolts for screens included
- Optional: top screen mount (49 €)
Reviews
There are no reviews yet.