Be the first to review “Display Stand Silver Triple HD” Cancel reply
Display Stand Silver Triple HD
246.22€ – 270.12€
- Sturdy, lean-free stand for a triple screen setup
- VESA 75/100 compatible
- Screen mounting plates are angle adjustable
- ‘Stepless’ fine tuning via M6 adjustment bolts ensures perfect aligning of the screens
- Height & width adjustable
- Vertical profiles
- Length: 112 cm | Inner distance max: 104 cm
- Bolts for screens included
- Optional: top screen mount
Related Products
Seat sliders Sparco
- High quality seat sliders from Sparco
- Longitudinal mounting hole distance 271 mm
- No FIA approval
- For lateral type mounting, side brackets are required
- If seat is bottom mount type (common in tubular frame seats and reclining seats), sliders can be fixed directly to the seat without side brackets
- Heavy duty version available here
Pivot Plate
- Pivot plate for fixing two aluminum profiles together
- Usually to mount a side monitor in a triple screen setup
- 40 degree scale for adjusting the pivot (+/- 20 degrees)
- Can be used in other than alu-profile rigs as well, if the construction is suitable
- Mounting holes are for M8 bolts
- Material: 5 mm aluminum, matte black
- Sold in kits of two and four
- Optional: M8 bolts, washers and T-nuts
- 8 pcs each if 2 plates selected
- 16 pcs each if 4 plates selected
Select options This product has multiple variants. The options may be chosen on the product page
SIMUCUBE Front Mount
- Compatibility:
- Simucube 2 Sport, Pro, Ultimate
- Simucube 1 and other ‘previous generation’ Direct Drive systems with MiGE motors 20/30 Nm
- 12 mm aluminium all plates
- Matte black
- Fits rigs with vertical profile (inner) distance 400-600 mm
- Horizontal slot holes: max. bolt distance 550 mm
- Adjustable tilt angle when side plates are used
- Usually mounted to the vertical profiles of an aluminum profile rig
- Multiple fixing points enable mounting to various types of (DIY) rigs
Display Stand HD
- Heavy duty stand for displays up to 65″
- VESA 100 and VESA 75 compatible
- Available in two colors / finishes:
- Black anodized
- Natural anodized (light grey)
- Bolt-through-profile fixing method used in the vertical profiles
- As the stand is not fixed to the rig
- Distance from user is easily adjustable
- Vibration from a powerful wheel base like direct drive can’t reach the display (which might harm the display over time)
- If needed, TV and other brackets are usually easy to mount to the aluminum slot profile (note: accessories like bolts etc. not included, varies between display manufacturers)
- Measurements
- Floor profiles: 700 mm
- Vertical profiles: 1100 mm
- Inner width: 700 mm
Select options This product has multiple variants. The options may be chosen on the product page
Direct Drive Mount
- Compatibility:
- SIMUCUBE 2 Sport, Pro, Ultimate
- SIMUCUBE 1 and other ‘previous generation’ Direct Drive motors with MiGE 130ST 20/30 Nm motors, for example VRS Direct Force Pro
- Adjustable tilt angle
- Can be mounted basically to any flat surface
- Mounting pattern: 210 mm x 40 mm (width / depth). Holes are for M8 bolts and min. M6 is recommended.
- Fits the industry standard 80/20 aluminum profile when spec 40×80 mm or above is used
- Material: 4 mm steel
- Matte black
- #technotactical
SIMGRADE° FX-80 Black
- Compact rig with black anodized finish
- Rigid and sturdy construction: can be used with Direct Drive wheel bases
- Natively compatible with Fanatec DD1, DD2 and CSL wheel bases
- When this: Direct Drive mount is fixed to the platform, rig is compatible with:
- Simucube 2 Sport, Pro & Ultimate
- VRS Direct Force Pro
- Simucube 1 and other previous generation Direct Drive wheel bases with MiGE motor 20/30 Nm
- Direct “bolt through profile” mounting method ⇒ no angle brackets needed
- Result: extra rigidity, easy to assemble and adjust, no squeaking noise when driving
- Wheel base mounting platform can be tilted up / down to get a perfect wheel angle
- Pedal deck can be easily moved back and forth
- Basically any pedals can be mounted
- Hand brake / shifter / mouse tray profile available as an option
- Pedals in pics: SIMGRADE° Thera
- Heel plate in pics: SIMGRADE° Thera heel plate
Select options This product has multiple variants. The options may be chosen on the product page
Trak Racer TR120 MK4
The TR120 has been designed with experience gained since Trak Racer started in 2008. The base structure is 120 × 40mm high-end aluminium T-Slot extruded profile, anodized in black.
Your choice of wheel mount will be supported by 120 × 40mm high-end aluminium T-Slot extruded profile wheel uprights, also anodized in black and supported with Trak Racer-Signature Corner Brackets – mounted to the side for additional support.
Wheel base, pedals and shifter compatibilities ⇒ scroll down.
Need a display stand as well? Click here
Select options This product has multiple variants. The options may be chosen on the product page
Motion Systems QS-220-PL
Linear actuator technology by Motion Systems allows to develop highly realistic applications with detailed motion textures, velocity, suspension interaction feedback, engine vibrations, tactile feedback, haptic system and vehicle dynamics.
Innovative technology, modular and compact design, as well as the quiet operation makes the QS-220-PL as a perfect motion base not only for professional application but also for home users in various types of cockpits. Additional sets of QS-220-PL can be configured as a 4 and 6 actuated system to provide 3 / 4 / 6 DOF using dedicated cockpits from the Qubic System product line.
By using dedicated software Qubic Manager the user can use several sets to create the most realistic simulation that immediately responds to onscreen situations to deliver real life experience in gaming or VR applications.
Scroll down to read more.
QS-MC6 below: 1 controller can manage max 6 actuators = 3 sets of QS-220-PL (sold in pairs)
Select options This product has multiple variants. The options may be chosen on the product page
Reviews
There are no reviews yet.