Seat side brackets Sabelt 
Be the first to review “Direct Drive Mount” Cancel reply
Direct Drive Mount
47.01€ (47.01€ tax 0%)
- Compatibility:
- SIMUCUBE 2 Sport, Pro, Ultimate
- SIMUCUBE 1 and other ‘previous generation’ Direct Drive motors with MiGE 130ST 20/30 Nm motors, for example VRS Direct Force Pro
- Adjustable tilt angle
- Can be mounted basically to any flat surface
- Mounting pattern: 210 mm x 40 mm (width / depth). Holes are for M8 bolts and min. M6 is recommended.
- Fits the industry standard 80/20 aluminum profile when spec 40×80 mm or above is used
- Material: 4 mm steel
- Matte black
- #technotactical
In stock
Related Products
SIMUCUBE 2 Pro
25 Nm of torque is enough to give you deep immersion with any track, car and condition. With Pro one might forget they are in simulation.
Combined with exceptionally high torque response rate in Pro motor, the sharpest kinks will be delivered at a clarity not seen in Direct Drive scene before. Torque response rate is adjustable to driver’s preferences.
SIMUCUBE 2 Pro is here to set the new golden standard for high-end class Direct Drive wheels. Scroll down for more feats and tech specs.
Need a wheel as well? Click here
Quick Release for wheel sold separately. Link to product site.
SIMUCUBE 2 Ultimate
32 Nm of torque and maxed-out torque response rate is at your disposal at anytime. Ultimate is based on Austrian made maximally dynamic industrial motor optimized for simulation. It’s equipped with a 24 bit resolution Hiperface angle sensor to be fully utilized by the most advanced signal processing unit seen in simulators.
Ultimate exclusively comes with advanced fine tunable signal processing to make the experience as personalized as humanly possible. This model was designed with “only the best is good enough” mindset.
SIMUCUBE Ultimate is a tribute to the Ultimate drivers. Scroll down for more feats and tech specs.
Need a wheel as well? Click here
SIMUCUBE 2 Sport
Sport comes with 17 Nm of direct drive torque and SIMUCUBE 2 benefits. This wheel base is a match for Sim Racing enthusiasts.
SC2 Sport delivers serious amount of juice to bring up adrenaline filled sweat to the skins of drivers. Sport has comparable responsiveness and signal processing of the top-end models of world famous SIMUCUBE 1
Sport will be your key to the club of sim racing champions. Scroll down for more feats and tech specs.
Need a wheel too? Click here
Quick Release for wheel sold separately. Link to product site.
Steering Wheel Spacer 100mm
- Black anodized aluminium
- Length: 100 mm
- Standard 6 x 70 mm bolt pattern (for M5 bolts)
- Other available lengths: 50 & 75 mm
- Use as an extension to bring steering wheel closer to the driver
SIMUCUBE Front Mount
- Compatibility:
- Simucube 2 Sport, Pro, Ultimate
- Simucube 1 and other ‘previous generation’ Direct Drive systems with MiGE motors 20/30 Nm
- 12 mm aluminium all plates
- Matte black
- Fits rigs with vertical profile (inner) distance 400-600 mm
- Horizontal slot holes: max. bolt distance 550 mm
- Adjustable tilt angle when side plates are used
- Usually mounted to the vertical profiles of an aluminum profile rig
- Multiple fixing points enable mounting to various types of (DIY) rigs
Rexing GT Wheel Timun v1.1
- Full carbon fiber body
- 4.3″ USBD480 LCD display compatible with popular sim racing software applications such as Simdash, Simhub and Z1
- 11 RGB LEDs, 6 additional marshal RGB LEDs: all configurable to telemetry data. Adjustable brightness (using a potentiometer on the wheel), and wide variety of colors to choose from
- 10 illuminated, dimmable push-buttons. Push buttons are high quality “Apem” brand with actuation force of 3.5 N and push travel of 1 mm
- 2 x Multi-switch which functions simultaneously as a rotary encoder, a digital joystick and a button
- 2 “Elma” brand thumb rotary encoders
- Original Alcantara® grips: superior quality and feel
- Weight: 1150 g | Diameter 320 mm | Grip thickest section 42 x 26 mm
READ MORE: SCROLL DOWN
Adjustable VESA plate
- Angle-adjustable mount for VESA 75 / VESA 100 compatible displays
- VESA 100 (100×100 mm pattern) is by far the most common type (also in 49″ Ultra / Super Ultra Wide displays)
- Can be mounted to practically any flat surface
- Usually mounted to aluminum profile (see pic)
- Angle can be adjusted without ‘steps’ as the adjusting is done with the M6 bolts
- This way the user can fine tune the angle / alignment exactly as wanted
- Included:
- M8 bolts – fixing the mount
- M6 bolts – angle adjustment
- M4 bolts – screen mounting (thread length: 10 mm)
- M4 spacers – screen mounting, used if necessary, depends on screen. Lengths: thread 8, body 10 mm
- Availability: 1 pc or 3 pcs
Select options This product has multiple variants. The options may be chosen on the product page
Bracket with cover, option: bolt & t-nut
- Available with / without bolts & t-nuts
- Qtys to choose from: 5 / 10 / 25 / 50 / 100 pcs
- Can be used for for connecting
- Aluminum profiles
- Plates
- Sim racing hardware
- DIY components
- Other elements
- Basically any solid material
- Height & depth: 36mm | Width: 38 mm
- Bolt type: DIN 7380 M8x16 with flange
- High strength class: 10.9
- Flange bolt provides stronger connection vs regular bolt
- T-nuts: Steel with M8 thread and spring loaded ball
- Note: if you choose to order bolts and T-nuts, qty for both is automatically 2 x bracket qty
Select options This product has multiple variants. The options may be chosen on the product page
Reviews
There are no reviews yet.