SIMUCUBE Mount 
SIMUCUBE Desk Mount
39 € (31.45 € tax 0 %)
- Compatibility:
- Simucube 2 Sport, Pro, Ultimate
- Simucube 1 and other ‘previous generation’ Direct Drive motors with MiGE 130ST 20/30 Nm motors, for example VRS Direct Force Pro
- Adjustable tilt angle
- Can be mounted basically to any flat surface
- Mounting pattern: 210 mm x 40 mm (width / depth). Holes are for M8 bolts and min. M6 is recommended.
- Fits the industry standard 80/20 aluminum profile when spec 40×80 mm or above is used
- Material: 4 mm steel
- Matte black
- #technotactical
In stock
Related Products
Adjustable VESA plate
- Angle-adjustable mount for VESA 75 / VESA 100 compatible displays
- VESA 100 (100×100 mm pattern) is by far the most common type (also in 49″ Ultra / Super Ultra Wide displays)
- Can be mounted to practically any flat surface
- Usually mounted to aluminum profile (see pic)
- Angle can be adjusted without ‘steps’ as the adjusting is done with the M6 bolts
- This way the user can fine tune the angle / alignment exactly as wanted
- Included:
- M8 bolts – fixing the mount
- M6 bolts – angle adjustment
- M4 bolts – screen mounting (thread length: 10 mm)
- M4 spacers – screen mounting, used if necessary, depends on screen. Lengths: thread 8, body 10 mm
- Availability: 1 pc or 3 pcs
SIMUCUBE 2 QR wheel side
- Already own or planning to buy an extra wheel for your Simucube 2 wheel base? Attach this quick release to your wheel and you are set.
- Wheel / rim compatibility:
- 6 x 70 mm pattern (by far the #1 standard)
- Also included 50.8 ➜ 70 mm pattern adapter
- Motor compatibility: Simucube 2 Sport, Pro and Ultimate
- Zero backlash = zero torque artifacts, crucial when no more than flawless force feedback feel is the target
- When locked in, equals a solid metal shaft. This is how it should be. And needs to be.
- Precision machined aluminium construction with black anodized surface finish
- 30 mm spacer (use when needed)
Q1R quick release
- The original Q1R quick release mechanism
- Absolute zero backlash and play
- 6 x 70 mm bolt pattern for M5 bolts
- Quick and easy-to-use latch operation
Basic frame 120
- Already have mounts/plates for pedals, wheel base and seat? Fix them to this frame and you are set.
- See also: our rig accessories
- Measurements (cm):
- Length 140 | Height 72 | Width 58
- Included in delivery:
- 20 x angle brackets with black covers
- 40 x T-nuts with M8 thread
- 40 x M8 bolts
- Black cover caps for profile ends
- Need extra parts? Ask us at info@simgrade.fi
Wheel deck
- Powder coated, matte black aluminium 10 mm
- Width 500 mm | Depth 194 mm
- For details, see product pic
- Compatibility
- SimGrade mount for Simucube 1 & 2
- Fanatec
- DD1 and DD2, CSR / CSW / CSW Adapter / CSL
- Logitech G25 / G27 / G29
- Thrustmaster T300 / T500RS and similar
- Note: Fixing bolts vary per wheel base and are not included. If you need bolts, mention it in order comments and we’ll try to fulfill your request.
Mouse plate
- Can be mounted to alum. rig or almost any other material with the included angle bracket (see pics)
- Width 290 mm, depth 210 mm
- Steel with 3 mm thickness
- Surface: black powder coating
- 3 x countersunk holes for M6 bolts (included)
- Included in delivery:
- M6 T-nuts for alum. profile
- 40 x 40 alum. profile, L=440 mm
- Angle bracket and bracket cover for fixing the profile to a rig
- 2 x M8 t-nut
- 2 x M8 bolt
SIMUCUBE 2 Ultimate
32 Nm of torque and maxed-out torque response rate is at your disposal at anytime. Ultimate is based on Austrian made maximally dynamic industrial motor optimized for simulation. It’s equipped with a 24 bit resolution Hiperface angle sensor to be fully utilized by the most advanced signal processing unit seen in simulators.
Ultimate exclusively comes with advanced fine tunable signal processing to make the experience as personalized as humanly possible. This model was designed with “only the best is good enough” mindset.
SIMUCUBE Ultimate is a tribute to the Ultimate drivers. Scroll down for more feats and tech specs.
Need a wheel as well? Click here
Free of charge when buying SIMUCUBE Ultimate: Desk Mount. (mention the mount in order comment field if you’d like one)
Basic rig 120
- Compatible with most wheel bases and pedals
- See also: our rig accessories
- Highly modular: use the best suited config for your use
- Upright 40 x 120 profiles are fixed to ‘floor’ profiles with M8 bolts, which yields several benefits:
- Easy to assemble
- Easy to make adjustments
- No gaps: no squeaking when driving
- Included in delivery:
- 30 x angle brackets with black covers
- 60 x T-nuts with M8 thread
- 60 x M8 bolts
- Black cover caps for profile ends
- Measurements (cm):
- Length 140 | Height 72 | Width 58
- Need extra parts or modification? Ask us at info@simgrade.fi
Reviews
There are no reviews yet.