Heel Stopper 
Be the first to review “Heel support & stopper “per foot”” Cancel reply
Heel support & stopper “per foot”
15.14€ – 31.08€
- Universal heel support / stopper
- Slot holes: distance adjustable
- Aluminum, matte black
- Can be mounted to practically any flat surface
- Countersunk slot holes for distance adjustment
- With individual plates per pedal, user preference can be matched 100 %
- 4 x bolts & T-nuts included per plate
- 1 / 2 / 3 pcs available
- Overall length: 118 mm | Width: 100 mm
Related Products
Heusinkveld Ultimate+ Base Plate
With the Sim Pedals Ultimate+ being able to cope with up to 140 kg of force, standard rigs often show excessive flex under these loads. This baseplate helps to create a rigid mounting platform for your Sim Pedals Ultimate.
The baseplate assembly consists of multiple elements: The main baseplate on which you mount the pedals, as well as two brackets which create ground clearance for the pedal bolts and nuts and provide mounting space for the pedal controller. The main baseplate element is 10 mm thick.
Please note that the Sim Pedals Sprint have their own baseplate and this plate is not compatible with Sprints.
Heusinkveld Sprint
- Strong, compact and widely adjustable design
- Precision laser cut steel, with grey anthracite RAL7016 and bead blasted semi-gloss surface finish
- Maximum actual brake pedal load 65 kg
- Brake feel easily adjustable with 6 different rubber stack heights and a spring for simulating free play before brake pads start to bite
- Load cells don’t wear out, are very accurate and insensitive to dust and dirt, features which make LCs the #1 solution for signal measuring in sim pedals
- SmartControl software allows easy configuration of dead zones, brake force and non-linear pedal output curves
- Base plate for Sprint pedals: here
Select options This product has multiple variants. The options may be chosen on the product page
VX-PRO Brake Kit V1
- Optional brake kit for VX-PRO pedals
- Provides extra adjustment range
- Two softer springs (compared to default yellow)
- Red: medium
- Blue: soft
- New side plates
- Available load bearing positions (four) differ from the stock plates, see last product image
- Red line depicts the stock side plate, black line the Brake Kit V1 version. This design allows extra brake configurations to find & match driver preference perfectly.
- Top position is higher than in the stock plates, creating a ‘maxxed-out’ stiffness configuration (with the yellow spring)
- Available load bearing positions (four) differ from the stock plates, see last product image
- The springs included can be used with stock side plates and the kit side plates with yellow default spring
R7 Advanced Brake Kit 2.0
- Optional brake kit for R7 pedals (Spec C)
- Included:
- Two pushrod packs (see arrows in the main image)
- All required bolts, nuts & washers for mounting the kit to R7 Spec C pedals
- With this brake kit you can fine tune the the R7 pedals even further to your liking
R7 Advanced Brake Kit 2.0
- Optional brake kit for R7 pedals (Spec C)
- Included:
- Two pushrod packs (see arrows in the main image)
- All required bolts, nuts & washers for mounting the kit to R7 Spec C pedals
- With this brake kit you can fine tune the the R7 pedals even further to your liking
Thera 2-pedal set
NEW 02/2023: Thera compatible with consoles via Drive Hub!
Extra info for PS5: here
Billet aluminum structure. Black anodized finish. Ultra smooth, silent operation. Rigidity: like no other. Super fast & easy adjustments. Zero lateral play. Linear-force operated, high accuracy clutch – the first on the market.
Inspired by these features? If yes, SIMGRADE° Thera pedals are the #1 choice for your sim racing setup.
DAN SUZUKI’S Review
Looking for a 3-pedal set? Click here
Mounting plates and other accessories here
Manual & calibration software here
More pictures here
FULL SPECS: SCROLL DOWN
VX-PRO Brake Kit V1
- Optional brake kit for VX-PRO pedals
- Provides extra adjustment range
- Two softer springs (compared to default yellow)
- Red: medium
- Blue: soft
- New side plates
- Available load bearing positions (four) differ from the stock plates, see last product image
- Red line depicts the stock side plate, black line the Brake Kit V1 version. This design allows extra brake configurations to find & match driver preference perfectly.
- Top position is higher than in the stock plates, creating a ‘maxxed-out’ stiffness configuration (with the yellow spring)
- Available load bearing positions (four) differ from the stock plates, see last product image
- The springs included can be used with stock side plates and the kit side plates with yellow default spring
Reviews
There are no reviews yet.