simucube
Showing all 12 results
131.47€ – 628.69€Price range: 131.47€ through 628.69€Heusinkveld Sprint
- Strong, compact and widely adjustable design
- Precision laser cut steel, with grey anthracite RAL7016 and bead blasted semi-gloss surface finish
- Maximum actual brake pedal load 65 kg
- Brake feel easily adjustable with 6 different rubber stack heights and a spring for simulating free play before brake pads start to bite
- Load cells don’t wear out, are very accurate and insensitive to dust and dirt, features which make LCs the #1 solution for signal measuring in sim pedals
- SmartControl software allows easy configuration of dead zones, brake force and non-linear pedal output curves
- Base plate for Sprint pedals: here
Select options This product has multiple variants. The options may be chosen on the product page
47.01€ (47.01€ tax 0%)Direct Drive Mount
- Compatibility:
- SIMUCUBE 2 Sport, Pro, Ultimate
- SIMUCUBE 1 and other ‘previous generation’ Direct Drive motors with MiGE 130ST 20/30 Nm motors, for example VRS Direct Force Pro
- Adjustable tilt angle
- Can be mounted basically to any flat surface
- Mounting pattern: 210 mm x 40 mm (width / depth). Holes are for M8 bolts and min. M6 is recommended.
- Fits the industry standard 80/20 aluminum profile when spec 40×80 mm or above is used
- Material: 4 mm steel
- Matte black
- #technotactical
- Compatibility:
1194.42€ (1194.42€ tax 0%)SIMUCUBE 2 Pro
25 Nm of torque is enough to give you deep immersion with any track, car and condition. With Pro one might forget they are in simulation.
Combined with exceptionally high torque response rate in Pro motor, the sharpest kinks will be delivered at a clarity not seen in Direct Drive scene before. Torque response rate is adjustable to driver’s preferences.
SIMUCUBE 2 Pro is here to set the new golden standard for high-end class Direct Drive wheels. Scroll down for more feats and tech specs.
Need a wheel as well? Click here
Quick Release for wheel sold separately. Link to product site.
1011.16€ (1011.16€ tax 0%)SIMUCUBE 2 Sport
Sport comes with 17 Nm of direct drive torque and SIMUCUBE 2 benefits. This wheel base is a match for Sim Racing enthusiasts.
SC2 Sport delivers serious amount of juice to bring up adrenaline filled sweat to the skins of drivers. Sport has comparable responsiveness and signal processing of the top-end models of world famous SIMUCUBE 1
Sport will be your key to the club of sim racing champions. Scroll down for more feats and tech specs.
Need a wheel too? Click here
Quick Release for wheel sold separately. Link to product site.
182.47€ (182.47€ tax 0%)OMP Super Quadro 320mm
- Premium wheel rim by OMP
- High quality suede upholstery
- 3 black anodized spokes
- Flat design
- 320 mm diameter
- Handgrip: anatomic oval shape
102.79€ (102.79€ tax 0%)Heusinkveld Sprint base plate
- Solid platform to mount Sprint pedals on your rig
- Mounting points are slots allowing lateral adjustment per individual pedal: 29 mm for brake, 24 mm for throttle & clutch
- Height adjustable heel plate, options: 0/20/40 mm
- Mounting hardware is supplied to mount the pedals to the base plate, as well as hardware to mount the base plate to a 6 mm thick underlying plate
- Powder coated anthacite grey & bead blasted semi-gloss surface finish
47.01€ (47.01€ tax 0%)Keyboard tray
- Width: 520 mm | Height 213 mm
- Angle is adjustable
- Steel, black powder coating
- Included:
- A joint and a 40 x 40 x 490 mm aluminium profile (see product pic)
- M8 T-nut and a bolt for mounting the tray to an aluminium profile rig
23.11€ (23.11€ tax 0%)Mouse plate
- Can be mounted to alum. rig or almost any other material with the included angle bracket (see pics)
- Width 290 mm, depth 210 mm
- Steel with 3 mm thickness
- Surface: black powder coating
- 3 x countersunk holes for M6 bolts (included)
- Included in delivery:
- M6 T-nuts for alum. profile
- 40 x 40 alum. profile, L=440 mm
- Angle bracket and bracket cover for fixing the profile to a rig
- 2 x M8 t-nut
- 2 x M8 bolt
349.80€ (349.80€ tax 0%)QSP RX-10
- Light but rigid fiberglass shell with a nice glossy gel coat
- High thigh support for improved ergonomics
- Upholstered in velour material
- Removable, washable leg and back cushions
- Extra lumbar cushions
- 5 harness slots, and can be used with 4-, 5- and 6 point harnesses
- Weight: 7.9 kg
- Lateral fixing, for which bolts included
- HANS® compatible
- Delivery: directly to customer address
301.99€ (301.99€ tax 0%)QSP Sport seat
- Reclining Sport seat from QSP
- Strong metallic structure
- Good ergonomics with detachable cushions
- Mounting: bottom mount – no side brackets needed
- No FIA approval for racing use
- Weight: 13 kg
- QSP seats are delivered to given address (DHL)
1401.59€ (1401.59€ tax 0%)Rexing GT Wheel Timun v1.1
- Full carbon fiber body
- 4.3″ USBD480 LCD display compatible with popular sim racing software applications such as Simdash, Simhub and Z1
- 11 RGB LEDs, 6 additional marshal RGB LEDs: all configurable to telemetry data. Adjustable brightness (using a potentiometer on the wheel), and wide variety of colors to choose from
- 10 illuminated, dimmable push-buttons. Push buttons are high quality “Apem” brand with actuation force of 3.5 N and push travel of 1 mm
- 2 x Multi-switch which functions simultaneously as a rotary encoder, a digital joystick and a button
- 2 “Elma” brand thumb rotary encoders
- Original Alcantara® grips: superior quality and feel
- Weight: 1150 g | Diameter 320 mm | Grip thickest section 42 x 26 mm
READ MORE: SCROLL DOWN
68.53€ (68.53€ tax 0%)SIMUCUBE 2 Quick Release wheel side
- Already own or planning to buy an extra wheel for your Simucube 2 wheel base? Attach this quick release to your wheel and you are set.
- Wheel / rim compatibility:
- 6 x 70 mm pattern (by far the #1 standard)
- Also included 50.8 ➜ 70 mm pattern adapter
- Motor compatibility: Simucube 2 Sport, Pro and Ultimate
- Zero backlash = zero torque artifacts, crucial when no more than flawless force feedback feel is the target
- When locked in, equals a solid metal shaft. This is how it should be. And needs to be.
- Precision machined aluminium construction with black anodized surface finish
- 30 mm spacer (use when needed)