Direct Drive Mount 
Be the first to review “SIMGRADE° LITE 80 Black” Cancel reply
SIMGRADE° LITE 80 Black
461.35€ – 469.32€
- Neat & light but still sturdy rig with black anodized finish
- Bolt mount method through profile, no angle brackets!
- Result: extra rigidity, easier & faster to assemble and adjust, no squeaking when driving and sleek looks
- Wheel Deck and Front Mount for fixing the wheel base available
- Both are angle and distance adjustable
- Wheel Deck: 10 mm matte black aluminum
- Front Mount: 12 mm matte black aluminum
- Wheel Deck compatible with
- Fanatec DD1 and DD2, CSR, CSW, CSW adapter, CSL
- Logitech G25, G27, G29
- Thrustmaster T300, T500RS and similar
- Front mount compatible with:
- Simucube 2 Sport, Pro & Ultimate
- Simucube 1 and other previous generation Direct Drive systems with MiGE motors 20/30 Nm
- Adjustable Pedal Deck: distance & angle
- Part closest to the user (40×80 profile) can be adjusted back & forth, which means that the deck is compatible with practically all pedals that have mounting holes
- If the Wheel Deck mount is bought first (user has Logitech base for example), it can be upgraded later with the Front Mount main plate when upgrading to Direct Drive
Related Products
SIMUCUBE Front Mount
- Compatibility:
- Simucube 2 Sport, Pro, Ultimate
- Simucube 1 and other ‘previous generation’ Direct Drive systems with MiGE motors 20/30 Nm
- 12 mm aluminium all plates
- Matte black
- Fits rigs with vertical profile (inner) distance 400-600 mm
- Horizontal slot holes: max. bolt distance 550 mm
- Adjustable tilt angle when side plates are used
- Usually mounted to the vertical profiles of an aluminum profile rig
- Multiple fixing points enable mounting to various types of (DIY) rigs
Seat sliders Sparco
- High quality seat sliders from Sparco
- Longitudinal mounting hole distance 271 mm
- No FIA approval
- For lateral type mounting, side brackets are required
- If seat is bottom mount type (common in tubular frame seats and reclining seats), sliders can be fixed directly to the seat without side brackets
- Heavy duty version available here
Sale!
Original price was: 35.86€.23.11€Current price is: 23.11€. (23.11€ tax 0%)
Display Mount VESA 75-100
- Angle & distance adjustable display mount
- Compatible with the most common standards: VESA 75 / VESA 100
- Inner distance of the side plates: 120 mm
- Fits, for example: 40×120 mm aluminum profile (see pics)
- Steel with 5 mm thickness: extremely sturdy
- Matte black
- Mounting holes on the sides: for M8 bolts
- Mounting holes on the front: for M4 bolts (standard)
- Included: 4 pcs M4x10 bolts & 4 pcs M4 male-female standoffs
Direct Drive Mount
- Compatibility:
- SIMUCUBE 2 Sport, Pro, Ultimate
- SIMUCUBE 1 and other ‘previous generation’ Direct Drive motors with MiGE 130ST 20/30 Nm motors, for example VRS Direct Force Pro
- Adjustable tilt angle
- Can be mounted basically to any flat surface
- Mounting pattern: 210 mm x 40 mm (width / depth). Holes are for M8 bolts and min. M6 is recommended.
- Fits the industry standard 80/20 aluminum profile when spec 40×80 mm or above is used
- Material: 4 mm steel
- Matte black
- #technotactical
Trak Racer TR120 MK4
The TR120 has been designed with experience gained since Trak Racer started in 2008. The base structure is 120 × 40mm high-end aluminium T-Slot extruded profile, anodized in black.
Your choice of wheel mount will be supported by 120 × 40mm high-end aluminium T-Slot extruded profile wheel uprights, also anodized in black and supported with Trak Racer-Signature Corner Brackets – mounted to the side for additional support.
Wheel base, pedals and shifter compatibilities ⇒ scroll down.
Need a display stand as well? Click here
Select options This product has multiple variants. The options may be chosen on the product page
Adjustable VESA plate
- Angle-adjustable mount for VESA 75 / VESA 100 compatible displays
- VESA 100 (100×100 mm pattern) is by far the most common type (also in 49″ Ultra / Super Ultra Wide displays)
- Can be mounted to practically any flat surface
- Usually mounted to aluminum profile (see pic)
- Angle can be adjusted without ‘steps’ as the adjusting is done with the M6 bolts
- This way the user can fine tune the angle / alignment exactly as wanted
- Included:
- M8 bolts – fixing the mount
- M6 bolts – angle adjustment
- M4 bolts – screen mounting (thread length: 10 mm)
- M4 spacers – screen mounting, used if necessary, depends on screen. Lengths: thread 8, body 10 mm
- Availability: 1 pc or 3 pcs
Select options This product has multiple variants. The options may be chosen on the product page
Seat side brackets Sabelt
- Sturdy side brackets from Sabelt
- To be used with seats that have lateral fixing
- Steel with 3 mm thickness
- Surface finish: black paint
- Mounting holes for M8 bolts
SIMGRADE° FX-80 Black
- Compact rig with black anodized finish
- Rigid and sturdy construction: can be used with Direct Drive wheel bases
- Natively compatible with Fanatec DD1, DD2 and CSL wheel bases
- When this: Direct Drive mount is fixed to the platform, rig is compatible with:
- Simucube 2 Sport, Pro & Ultimate
- VRS Direct Force Pro
- Simucube 1 and other previous generation Direct Drive wheel bases with MiGE motor 20/30 Nm
- Direct “bolt through profile” mounting method ⇒ no angle brackets needed
- Result: extra rigidity, easy to assemble and adjust, no squeaking noise when driving
- Wheel base mounting platform can be tilted up / down to get a perfect wheel angle
- Pedal deck can be easily moved back and forth
- Basically any pedals can be mounted
- Hand brake / shifter / mouse tray profile available as an option
- Pedals in pics: SIMGRADE° Thera
- Heel plate in pics: SIMGRADE° Thera heel plate
Select options This product has multiple variants. The options may be chosen on the product page
Reviews
There are no reviews yet.