Be the first to review “Q1R wheel side 70 mm” Cancel reply
Q1R wheel side 70 mm
69.32€ (69.32€ tax 0 %)
- Wheel side of the famous Q1R mechanism
- 6 x 70 mm bolt pattern for M5 bolts
- Backlash and play equal zero by definition
In stock
Related Products
Steering Wheel Spacer 100mm
- Black anodized aluminium
- Length: 100 mm
- Standard 6 x 70 mm bolt pattern (for M5 bolts)
- Other available lengths: 50 & 75 mm
- Use as an extension to bring steering wheel closer to the driver
SIMUCUBE 2 Quick Release wheel side
- Already own or planning to buy an extra wheel for your Simucube 2 wheel base? Attach this quick release to your wheel and you are set.
- Wheel / rim compatibility:
- 6 x 70 mm pattern (by far the #1 standard)
- Also included 50.8 ➜ 70 mm pattern adapter
- Motor compatibility: Simucube 2 Sport, Pro and Ultimate
- Zero backlash = zero torque artifacts, crucial when no more than flawless force feedback feel is the target
- When locked in, equals a solid metal shaft. This is how it should be. And needs to be.
- Precision machined aluminium construction with black anodized surface finish
- 30 mm spacer (use when needed)
SIMUCUBE Mount
SPECIFICATIONS:
Maximum height 185 mm, minimum height 155 mm, width 164 mm, depth 128 mm
Net weight 1.3 kg
Max 20 degree tilt angle (Sport & Pro)
Max 12.5 degree*) tilt angle (Ultimate)
*if the rear of the Ultimate wheelbase touches the surfaceMaterial: 3 mm steel
78.4 mm x 66 mm hole pattern is compatible with many readily available deck mounts
Screws included in the package:
4 x M5x10 button head
4 x M5 washer
4 x M8x25 button head
4 x M8 washer
4 x M8 nyloc nut
4 x M6x12 cap head screw
4 x M6 washer
Q1R quick release
- The original Q1R quick release mechanism
- Absolute zero backlash and play
- 6 x 70 mm bolt pattern for M5 bolts
- Quick and easy-to-use latch operation
Steering Wheel Spacer 75mm
- Black anodized aluminium
- Length: 75 mm
- Standard 6 x 70 mm bolt pattern (for M5 bolts)
- Available in three lengths: 50/75/100 mm
- Use as an extension to bring steering wheel closer to the driver
SIMUCUBE Front Mount
- Compatibility:
- Simucube 2 Sport, Pro, Ultimate
- Simucube 1 and other ‘previous generation’ Direct Drive systems with MiGE motors 20/30 Nm
- 12 mm aluminium all plates
- Matte black
- Fits rigs with vertical profile (inner) distance 400-600 mm
- Horizontal slot holes: max. bolt distance 550 mm
- Adjustable tilt angle when side plates are used
- Usually mounted to the vertical profiles of an aluminum profile rig
- Multiple fixing points enable mounting to various types of (DIY) rigs
Wheel deck
- Powder coated, matte black aluminium 10 mm
- Width 500 mm | Depth 194 mm
- For details, see product pic
- Compatibility
- SimGrade mount for Simucube 1 & 2
- Fanatec
- DD1 and DD2, CSR / CSW / CSW Adapter / CSL
- Logitech G25 / G27 / G29
- Thrustmaster T300 / T500RS and similar
- Note: Fixing bolts vary per wheel base and are not included. If you need bolts, mention it in order comments and we’ll try to fulfill your request.
Direct Drive Mount
- Compatibility:
- SIMUCUBE 2 Sport, Pro, Ultimate
- SIMUCUBE 1 and other ‘previous generation’ Direct Drive motors with MiGE 130ST 20/30 Nm motors, for example VRS Direct Force Pro
- Adjustable tilt angle
- Can be mounted basically to any flat surface
- Mounting pattern: 210 mm x 40 mm (width / depth). Holes are for M8 bolts and min. M6 is recommended.
- Fits the industry standard 80/20 aluminum profile when spec 40×80 mm or above is used
- Material: 4 mm steel
- Matte black
- #technotactical
EN 
FI
Reviews
There are no reviews yet.