Be the first to review “Seat sliders Sparco” Cancel reply
Seat sliders Sparco
31.08€ (31.08€ tax 0 %)
- High quality seat sliders from Sparco
- Longitudinal mounting hole distance 271 mm
- No FIA approval
- For lateral type mounting, side brackets are required
- If seat is bottom mount type (common in tubular frame seats and reclining seats), sliders can be fixed directly to the seat without side brackets
- Heavy duty version available here
In stock
Related Products
Mouse plate
- Can be mounted to alum. rig or almost any other material with the included angle bracket (see pics)
- Width 290 mm, depth 210 mm
- Steel with 3 mm thickness
- Surface: black powder coating
- 3 x countersunk holes for M6 bolts (included)
- Included in delivery:
- M6 T-nuts for alum. profile
- 40 x 40 alum. profile, L=440 mm
- Angle bracket and bracket cover for fixing the profile to a rig
- 2 x M8 t-nut
- 2 x M8 bolt
Adjustable VESA plate
- Angle-adjustable mount for VESA 75 / VESA 100 compatible displays
- VESA 100 (100×100 mm pattern) is by far the most common type (also in 49″ Ultra / Super Ultra Wide displays)
- Can be mounted to practically any flat surface
- Usually mounted to aluminum profile (see pic)
- Angle can be adjusted without ‘steps’ as the adjusting is done with the M6 bolts
- This way the user can fine tune the angle / alignment exactly as wanted
- Included:
- M8 bolts – fixing the mount
- M6 bolts – angle adjustment
- M4 bolts – screen mounting (thread length: 10 mm)
- M4 spacers – screen mounting, used if necessary, depends on screen. Lengths: thread 8, body 10 mm
- Availability: 1 pc or 3 pcs
31.08€ (31.08€ tax 0 %)
SALE !
23.11€ (23.11€ tax 0 %)
Display Mount VESA 75-100
- Angle & distance adjustable display mount
- Compatible with the most common standards: VESA 75 / VESA 100
- Inner distance of the side plates: 120 mm
- Fits, for example: 40×120 mm aluminum profile (see pics)
- Steel with 5 mm thickness: extremely sturdy
- Matte black
- Mounting holes on the sides: for M8 bolts
- Mounting holes on the front: for M4 bolts (standard)
- Included: 4 pcs M4x10 bolts & 4 pcs M4 male-female standoffs
Display Stand Light
- Light but sturdy aluminum stand for displays up to 49″
- VESA 100 and VESA 75 compatible
- Available in two colors / finishes:
- Black anodized
- Natural anodized (light grey)
- As the stand is not fixed to the rig
- Distance from user is easily adjustable
- Vibration from a powerful wheel base like direct drive can’t reach the display (which might harm the display over time)
- If needed, TV and other brackets are usually easy to mount to the slot profile (note: accessories like bolts etc. not included, varies between display manufacturers)
- Measurements:
- Floor profiles: 700 mm
- Vertical profiles: 1100 mm
- Inner width 700 mm
Trak Racer TR160 MK4
The TR160, the King of the Rigs, has been designed with experience gained since Trak Racer started in 2008. The base structure is 160 × 40mm high-end aluminium T-Slot extruded profile, anodized in black.
Your choice of wheel mount will be supported by 160 × 40mm high-end aluminium T-Slot extruded profile wheel uprights, also anodized in black and supported with Trak Racer-Signature Corner Brackets – mounted to the side for additional support.
Wheel bases, pedals and other compatibility ⇒ scroll down.
Need a display stand as well? Click here
Display Stand Triple HD Black
- Sturdy, lean-free stand for a triple screen setup
- VESA 75/100 compatible
- Screen mounting plates are angle adjustable
- ‘Stepless’ fine tuning via M6 adjustment bolts ensures perfect aligning of the screens
- Height & width adjustable
- Vertical profiles
- Length: 112 cm | Inner distance max: 104 cm
- Bolts for screens included
Pivot Plate
- Pivot plate for fixing two aluminum profiles together
- Usually to mount a side monitor in a triple screen setup
- 40 degree scale for adjusting the pivot (+/- 20 degrees)
- Can be used in other than alu-profile rigs as well, if the construction is suitable
- Mounting holes are for M8 bolts
- Material: 5 mm aluminum, matte black
- Sold in kits of two and four
- Optional: M8 bolts, washers and T-nuts
- 8 pcs each if 2 plates selected
- 16 pcs each if 4 plates selected
EN 
FI
Reviews
There are no reviews yet.