Be the first to review “R7 Advanced Brake Kit 2.0” Cancel reply
R7 Advanced Brake Kit 2.0
78.88€ (78.88€ tax 0%)
- Optional brake kit for R7 pedals (Spec C)
- Included:
- Two pushrod packs (see arrows in the main image)
- All required bolts, nuts & washers for mounting the kit to R7 Spec C pedals
- With this brake kit you can fine tune the the R7 pedals even further to your liking
In stock
Related Products
Heusinkveld Sprint
- Strong, compact and widely adjustable design
- Precision laser cut steel, with grey anthracite RAL7016 and bead blasted semi-gloss surface finish
- Maximum actual brake pedal load 65 kg
- Brake feel easily adjustable with 6 different rubber stack heights and a spring for simulating free play before brake pads start to bite
- Load cells don’t wear out, are very accurate and insensitive to dust and dirt, features which make LCs the #1 solution for signal measuring in sim pedals
- SmartControl software allows easy configuration of dead zones, brake force and non-linear pedal output curves
- Base plate for Sprint pedals: here
Select options This product has multiple variants. The options may be chosen on the product page
Thera 2-pedal set
NEW 02/2023: Thera compatible with consoles via Drive Hub!
Extra info for PS5: here
Billet aluminum structure. Black anodized finish. Ultra smooth, silent operation. Rigidity: like no other. Super fast & easy adjustments. Zero lateral play. Linear-force operated, high accuracy clutch – the first on the market.
Inspired by these features? If yes, SIMGRADE° Thera pedals are the #1 choice for your sim racing setup.
DAN SUZUKI’S Review
Looking for a 3-pedal set? Click here
Mounting plates and other accessories here
Manual & calibration software here
More pictures here
FULL SPECS: SCROLL DOWN
VX-PRO Brake Kit V1
- Optional brake kit for VX-PRO pedals
- Provides extra adjustment range
- Two softer springs (compared to default yellow)
- Red: medium
- Blue: soft
- New side plates
- Available load bearing positions (four) differ from the stock plates, see last product image
- Red line depicts the stock side plate, black line the Brake Kit V1 version. This design allows extra brake configurations to find & match driver preference perfectly.
- Top position is higher than in the stock plates, creating a ‘maxxed-out’ stiffness configuration (with the yellow spring)
- Available load bearing positions (four) differ from the stock plates, see last product image
- The springs included can be used with stock side plates and the kit side plates with yellow default spring
R7 Advanced
Advanced Brake Kit 2.0
- Optional brake kit for R7 pedals (Spec C)
- Included:
- Two pushrod packs (see arrows in the main image)
- All required bolts, nuts & washers for mounting the kit to R7 Spec C pedals
- With this brake kit you can fine tune the the R7 pedals even further to your liking
Thera 3-pedal set
NEW 02/2023: Thera compatible with consoles via Drive Hub!
Extra info for PS5: here
Billet aluminum structure. Black anodized finish. Ultra smooth, silent operation. Rigidity: like no other. Super fast & easy adjustments. Zero lateral play. Linear-force operated, high accuracy clutch – the first on the market.
Inspired by these features? If yes, SIMGRADE° Thera pedals are the #1 choice for your sim racing setup.
DAN SUZUKI’S Review
Looking for a 2-pedal set? Click here
Mounting plates and other accessories here
Manual & calibration software here
More pictures here
FULL SPECS: SCROLL DOWN
Heusinkveld Ultimate+
- CNC precision laser cut stainless steel with a glass bead blasted finish
- Capable of handling up to 140 kg of actual force at the brake pedal (200 kg loadcell)
- Compatible with Heusinkveld SmartControl software
- EMC tested
- Hydraulic damping on every pedal, custom made elastomers for a progressive brake feel
- Electronics provide a full-range 12bit output for each pedal
- Custom output curves can be freely configured and stored into profiles
- All key pivot points have slide bearings and have gone through automated durability testing
Select options This product has multiple variants. The options may be chosen on the product page
VX-PRO
Clutch
Pedals with a price-performance ratio you’ve never seen. VX-PRO pedals are the end result of three years of development and include features from our R7 and Thera models.
Extremely wide and easy adjustments for the brake resistance combined with freely and independently adjustable “dual stage” functionality guarantees a braking feel that is perfectly tailored for you – the end result is full confidence even in the most challenging braking zones.
The high fidelity response of the throttle provides perfect control on the corner exits, and if you want to maximize control accuracy, check out our tilting heel support. We recommend the side support as well.
Mounting pattern: here
The unbeforeseen mechanical structure of the clutch pedal allows creating response profiles completely freely – end result being the best clutch we’ve ever used. Resistance can be adjusted in a matter of seconds from road car feel to race car feel.
REVIEWS & GUIDES:
• NEW! Serial Driver (in French 🇫🇷 – en français) review
• NEW! CAR Magazine UK (written) review
• NEW! Grayze Dynamics: Setup guide
• Dave Cam’s review
• The Simpit review
• Race Beyond Matter review
• Dan Suzuki’s First Impressions review
• RON (in German 🇩🇪 – auf Deutsch) review
VX-PRO
Tilting heel support
Supports driver’s heel through the whole pedal travel range, eliminating need for repositioning your foot during racing.
In addition, sole of the foot sliding along pedal face is effectively history.
Briefly put, this brilliant kit brings comfort and input accuracy to a whole new level!
Compatible with VX-PRO throttle & brake. Price is per one pedal.
Reviews
There are no reviews yet.