Näytä ostoskori “Heusinkveld Sprint kiinnityslevy” on lisätty ostoskoriin.
Kantapäälevy / stoppari
Arvio 4.00 5:stä perustuen 1 asiakkaan arvotukseen.
(1 tuotearvio)31.45€ (31.45€ alv 0 %)
- Great for VX-PRO ja Thera pedals, can be used with basically any pedals
- Fixing bolts M5 & t-nuts M5 included for mounting to aluminum profile (or just a plain plate)
- Can be mounted on any flat surface
- Pintakäsittely: mattamusta jauhemaalaus
- Leveys 386 mm
Varastossa
Tuotetunnus (SKU): SGR-HSS Osastot: Poljintarvikkeet, polkimet, Rigitarvikkeet
Liittyvät tuotteet
Heusinkveld Sprint
- Jämäkkä mutta kompakti, laajasti säädettävissä oleva rakenne
- Laserleikattua terästä, RAL7016 harmaa-antrasiitti jauhemaalauksella ja lasikuulapuhalluksella viimeisteltynä
- Maksimijarruvoima jalalta 65 kg
- Tuntuma helposti säädettävissä kuudella eripituisella kumilla ja jousella, jolla on mahdollista simuloida polkimen vapaata liikettä ennen 'bite pointtia'
- Voima-anturit (load cell) eivät kulu eikä esimerkiksi pöly vaikuta niihin, joten ne soveltuvat sim racing polkimiin erittäin hyvin
- SmartControl ohjelmisto mahdollistaa polkimen vapaan liikkeen (dead zone), tarvittavan jarruvoiman ja epälineaaristen vastekäyrien määrittämisen
- Kiinnityslevy Sprinteille tästä
Heusinkveld Ultimate+
- CNC precision laser cut stainless steel with a glass bead blasted finish
- Capable of handling up to 140 kg of actual force at the brake pedal (200 kg loadcell)
- Compatible with Heusinkveld SmartControl software
- EMC tested
- Hydraulic damping on every pedal, custom made elastomers for a progressive brake feel
- Electronics provide a full-range 12bit output for each pedal
- Custom output curves can be freely configured and stored into profiles
- All key pivot points have slide bearings and have gone through automated durability testing
Heusinkveld Sprint kiinnityslevy
- Solid platform to mount Sprint pedals on your rig
- Mounting points are slots allowing lateral adjustment per individual pedal: 29 mm for brake, 24 mm for throttle & clutch
- Height adjustable heel plate, options: 0/20/40 mm
- Mounting hardware is supplied to mount the pedals to the base plate, as well as hardware to mount the base plate to a 6 mm thick underlying plate
- Powder coated anthacite grey & bead blasted semi-gloss surface finish
Hiiriteline
- Can be mounted to alum. rig or almost any other material with the included angle bracket (see pics)
- Width 290 mm, depth 210 mm
- Materiaali 3 mm paksua terästä
- Surface: black powder coating
- 3 x countersunk holes for M6 bolts (included)
- Included in delivery:
- M6 T-nuts for alum. profile
- 40 x 40 alum. profile, L=440 mm
- Angle bracket and bracket cover for fixing the profile to a rig
- 2 x M8 t-nut
- 2 x M8 bolt
Thera kytkin
- Billet aluminum, black anodized finish
- Ruostumattomasta teräksestä valmistetut kuulalaakerit kaikissa tärkeimmissä nivelpisteissä
- Ultra smooth operation ensured by using ball bearings
- Zero lateral play
- Ei vaadi voitelua
- Hiljaiset käytössä
- Ei metalli-metalli-kontaktia liikkeenrajoittimissa
- Kiinnittäminen: 4kpl M6 pultteja (myös M5 mahdollinen). Asennuskaavio (klikkaa avataksesi): 80mm (syvyys) x 24mm (poikittais)
- Takuu: 5 vuotta yksityiskäyttö / 2 vuotta kaupallinen
- Suunniteltu, valmistettu ja kokoonpantu Suomessa 🇫🇮
Moottoriteline direct drive
- Yhteensopivuus:
- SIMUCUBE 2 Sport, Pro, Ultimate
- SIMUCUBE 1 and other ‘previous generation’ Direct Drive motors with MiGE 130ST 20/30 Nm motors, for example VRS Direct Force Pro
- Säädettävä kallistuskulma
- Mahdollista kiinnittää mille tahansa tasaiselle pinnalle / tasolle
- Asennuskaavio: 210mm (poikittain) x 40mm (syvyyssuunta). Reiät M8-pulteille, myös. M6-pultteja voi käyttää
- Käy suoraan yleisesti rigeissä käytettävään 80/20 alumiiniprofiiliin
- Materiaali: 4mm terästä
- Mattamusta
- #teknotaktinen
SIMUCUBE / direct drive moottoriteline
- Yhteensopivuus:
- SIMUCUBE 2 Sport, Pro ja Ultimate
- Simucube 1 and other ‘previous generation’ Direct Drive systems with MiGE motors 20/30 Nm
- 12 mm aluminium all plates
- Mattamusta
- Fits rigs with vertical profile (inner) distance 400-600 mm
- Horizontal slot holes: max. bolt distance 550 mm
- Adjustable tilt angle when side plates are used
- Usually mounted to the vertical profiles of an aluminum profile rig
- Multiple fixing points enable mounting to various types of (DIY) rigs
ALE! 36.29€ 23.39€ (23.39€ alv 0 %)
Näyttökiinnike (sääd.) VESA 75/100
- Angle & distance adjustable display mount
- Compatible with the most common standards: VESA 75 / VESA 100
- Inner distance of the side plates: 120 mm
- Fits, for example: 40×120 mm aluminum profile (see pics)
- Steel with 5 mm thickness: extremely sturdy
- Mattamusta
- Mounting holes on the sides: for M8 bolts
- Mounting holes on the front: for M4 bolts (standard)
- Included: 4 pcs M4x10 bolts & 4 pcs M4 male-female standoffs
Janne (varmistettu kirjoittaja) –
sturdy plate, although in pictures it shows 4 screw holes, there were only two, those 2 are sufficient for mounting.