Basic rig 120

499 €

Compatible with most wheel bases and pedals
- See also: our rig accessories
Highly modular: use the best suited config for your use
Upright 40 x 120 profiles are fixed to ‘floor’ profiles with M8 bolts, which yields several benefits:
- Easy to assemble
- Easy to make adjustments
- No gaps: no squeaking when driving
Included in delivery:
- 30 x angle brackets with black covers
- 60 x T-nuts with M8 thread
- 60 x M8 bolts
- Black cover caps for profile ends
Measurements (cm):
- Length 140 | Height 72 | Width 58
Need extra parts or modification? Ask us at info@simgrade.fi

In stock

Categories: Basic rigs & frames, Rigs

Already have mounts/plates for pedals, wheel base and seat? Fix them to this frame and you are set.
See also: our rig accessories
Measurements (cm):
- Length 140 | Height 72 | Width 58
Included in delivery:
- 20 x angle brackets with black covers
- 40 x T-nuts with M8 thread
- 40 x M8 bolts
- Black cover caps for profile ends
Need extra parts? Ask us at info@simgrade.fi

319 €

Compatible with most wheel bases and pedals
- See also: our rig accessories
Lighter 80-size profiles, still very rigid construction
Measurements (cm):
- Length 140 | Height 72 | Width 58
Highly modular: use the best suited config for your use
Upright 40 x 80 profiles are fixed to ‘floor’ profiles with M8 bolts, which yields several benefits:
- Easy to assemble
- Easy to make adjustments
- No gaps: no squeaking when driving
Included in delivery:
- 30 x angle brackets with black covers
- 60 x T-nuts with M8 thread
- 60 x M8 bolts
- Black cover caps for profile ends
Need extra parts or modification? Ask us at info@simgrade.fi

399 €

For fixing a seat to seat sliders or directly to rig
Easy to assemble and fits almost any seat
Steel, 4 mm
Powder coated black finish
M8 bolts fit all holes
Brackets for increased seat angle adjustment
- Not obligatory to use but nifty when, for instance, formula style ergonomics is desired
- Bigger angle is usually better for your back
Dimensions
- Height: 140 mm | Width: 79 mm
- See also: product pic with dimensions

Like the name reveals, this rig is rigid
Easy to assemble and make adjustments to pedal deck and motor position for best ergonomics and feel
Bolt fixing for the upright 40×120 profiles (bottom)
- Zero gaps between profiles and a very sturdy & easy to assemble construction
- No movement or squeaking when driving
Can be purchased with or without keyboard tray and mouse plate
Choose front mount for Simucube motors or wheel deck for non-direct drive wheel bases
- Compatibility: natively with Heusinkveld Sprint and Fanatec V3
- Scroll down for more
Pedal deck is included as default. Seat and seat brackets not included.

– SCROLL DOWN FOR MORE SPECS! –

729 € – 879 €

Adjustable motor mount, compatible with:
- Simucube 2 Sport, Pro and Ultimate
- Simucube 1 with MiGE motors (20 and 30 Nm models)
Fits natively all Simucube 2 models as the mount has two sets of bolt patterns (Ultimate has smaller pattern vs. Sport & Pro)
Height and angle adjustable
Fits directly to an aluminium profile with a minimum of 40×80 spec
Measurements: see picture
All holes and slot holes for M8 bolts
Material: 3 mm steel
Surface: powder coated matte black
M8 bolts, nylock nuts and washers for fixing the ‘paws’ (part #2, see pic) to the mount are included
Note: regarding the upright direction (lowest) fixing bolts: depending on the rig / frame that the motor is installed, required bolt lengths vary. You can request bolts to be included in the delivery (mention it in order comments). We can’t guarantee the extra bolts and nuts delivery but we’ll do our best to fulfill the request.

Width: 520 mm | Height 213 mm
Angle is adjustable
Steel, black powder coating
Included:
- A joint and a 40 x 40 x 490 mm aluminium profile (see product pic)
- M8 T-nut and bolt for mounting the tray to aluminium profile rig

149 €